1-2-3. Power Supply PC Board
1. Peel off the tape (1).
2. Remove the connector (2).
3. Remove the connector (3).
4. Release the wire part of the connector with the binding
band (4) tightened.
5. Remove three screws (5).
6. Remove two screws (6).
7. Release two claws and remove the power PC board (7).
Power PC board (7)
Screws (5)
Claws
Fig. 2-1-9
Connector (2)
Tape (1)
Screws (6)
Connector (3)
Binding band (4)
1-2-4. Front Display and Power SW PC Boards
1. Remove the front panel. (Refer to item 1-1-3.)
2. Remove six screws (1) and remove the front display
PC board (2).
3. Remove two screws (3) and remove the power switch
PC board (4).
Screws (3)
Power SW
PC board (4)
Fig. 2-1-10
Front display
PC board (2)
Screws (1)