Toshiba SD-2050 Service Manual page 73

1-4-2. Tray Mounting
<The First Tray 1 Mounting>
1. Mount the first tray 1 by fitting to the bosses at two
locations after sliding the upper wing to the inner side.
2. Slide the first tray 1 to front side (arrow A direction)
until it stops.
Upper wing
(mounted with the first tray 1 .)
Upper side
Lower side
Lower wing
Boss
Upper wing
A
Lower wing
Fig. 2-1-25
<The Second Tray 2 Mounting>
1. Insert the second tray 2 along the lower groove.
2. Turn the gear clockwise until it stops and descend the
tray.
Insert along the lower groove.
Gear
Fig. 2-1-26
First tray 1
Label of
first tray
Tray
Second tray 2
<Tray mounting>
1. Remove the gear (1).
2. Insert the tray (2) horizontally.
3. Set the gear (1) to fit the rack gear of the tray.
4. Insert the tray (2) to the inner side until it stops.
5. Turn the gear (3) to confirm the movement.
Rack gear of tray
Gear (1)
Fig. 2-1-27
Gear (1)
Gear (3)
Tray (2)