Tray (5)
Mechanism assembly (3)
Fig. 2-1-3
<Tray Panel Removal>
1. Eject the tray (3).
2. Twist the tray panel (4) a little in the arrow A direction
with the tray (3) held to release two claws and lift up
the tray panel (4) in the arrow B direction, then the
tray panel (4) is removed.
3. When mounting the tray panel (4), fit the tray panel
(4) into the groove of the both sides of the tray (3)
until it clicks.
B
A
Tray (3)
Fig. 2-1-4
Gear (4)
Mechanism assembly (3)
Tray (3)
Tray panel (4)
Claws
Tray panel (4)
1-1-3. Front Panel
1. Remove the flexible cable (1).
2. Release four claws (2) and remove the front panel (3).
Claw (2)
Front
panel (3)
Claws (2)
Fig. 2-1-5
1-1-4. Rear Panel
1. Remove three screws (1) and remove the rear panel (2).
Rear panel (2)
Fig. 2-1-6
Flexible cable (1)
Claw (2)
Screws (1)