Network Management; Lan Setup - D-Link ShareCenter Pulse DNS-320 User Manual

Section 4 - Coniguration
he LAN Settings allows you to enable LLTD and to conigure the Link Speed and the IP address as a DHCP client or Static IP.
IP Settings
lient: electing DHCP Client will cause the DNS-320 to obtain an IP address
from the local DHCP server.
tatic IP: electing Static IP requires you to assign the IP information for the
DNS-320 manually.
ddress: ter an IP address for your device. The IP address of each device
on the local area network must be within the same IP address range
and subnet mask.
ask: ter the Subnet Mask. The default subnet mask is 255.255.255.0.
ateway IP ter the Gateway IP Address for the device. The Gateway IP Address
Address: is almost always the LAN address of your router. Most D-Link routers
have a default LAN IP address of 192.168.0.1.
the irst and second DNS Addresses for the device. The irst
DNS address is usually the LAN address of your router. A DNS Address
will allow the device to resolve names into IP addresses. Click Save
Settings when inished
D-Link ShareCenter Pulse DNS-320 User Manual

Network Management

LAN Setup

59