Troubleshooting - ATEN CS-9134 User Manual

w
CS-9134:
MVs computers MVs
1 4 7
2 4 - 7 8
3 7 - 10 9
4 10 - 13 10
5 13 - 16 11
6 16 - 19 12

Troubleshooting

Symptom Possible Cause
Erratic Unit not receiving
behavior. enough power under
self-powered operation.
Pressing Hot The connection from
Keys gets no the selected port to
response. the target computer
has been broken, or
the computer is turned
OFF.
Improper keyboard
reset.
Improper Master View
reset.
Incorrectly keying in
the Port ID.
Mouse not Improper mouse
responding. reset.
24
computers MVs computers
19 - 22 13 37 - 40
22 - 25 14 40 - 43
25 - 28 15 43 - 46
28 - 31 16 46 - 49
31 - 34 17 49 - 52
34 - 37 18 52 - 55
Action
Use the Power Adapter that was supplied with
the unit to provide external power.
Check the Online LED for the selected port. If it
is not lit:
1. Manually press one of the Select switches to
connect to a computer that is powered ON.
2. Check the cables to make sure they are all
properly connected.
1. Reset the keyboard (and mouse) by
simultaneously pressing Buttons 1 and 2 on
the First Stage unit for 3 seconds.
2. Unplug the keyboard connector from the
Console Keyboard Port, then plug it back in.
Turn off all Master View units and wait 10
seconds before turning them back on. See
Powering Off and Restarting, p. 12.
After invoking the Hotkey function with the
[Ctrl]+[Shift]+[Alt] combination, be sure to key
in the Port ID and press [Enter] within one
second for each key.
1. Reset the mouse (and keyboard) by
simultaneously pressing Buttons 1 and 2 on
the First Stage unit for 3 seconds.
2. Unplug the mouse connector from the
Console Mouse Port, then plug it back in.
CS-9134 / CS-9138 User Manual
MVs computers
19 55 - 58
20 58 - 61
21 61 - 64
2001-05-21