ATEN CS-9134 User Manual page 23

Note: 1. You can access any port on any list by using the Navigation Keys
then pressing [Enter].
2. If you select a port that does not have a computer attached to it, or
if the attached computer is powered Off, the OSD will still switch to
it, and will not show an error.
w
F4 QV:
QV lets you select which ports you want to include for automatic scanning under
the Quick View Scanning function (see F2, above). [F4] is a toggle. To
select/deselect a port, move the highlight bar to it, then press [F4].
When a port has been selected, an arrowhead displays in the QV column to
indicate so. When a port is deselected, the arrowhead disappears.
w
F5 EDIT:
To help remember which computer is attached to a particular port, every port
can be given a name. The EDIT function allows you to create, modify, or
delete port names. To edit a port name:
1. Move the highlight bar to the port you want to edit.
2. Press [F5].
3. Key in the new Port Name, or modify/delete the old one.
The maximum number of characters allowed for the Port Name is 15.
Legal characters include:
w
All alpha characters: a - z; A - Z
w
All numeric characters: 0 - 9
w
+, -, /, :, ., and Space
Case does not matter; OSD displays the Port Name in all capitals no
matter how they were keyed in.
4. When you have finished editing, press [Enter] to have the change take
effect. To abort the change, press [Esc].
CS-9134 / CS-9138 User Manual 19
2001-05-21