Hdmi Setup - Sharp LC-20AX7X Operation Manual

Useful Features (Continued)

HDMI SETUP

Please use the HDMI terminal when connecting HD Video equipment. (See page 9.)
HD Video equipment
Displaying an image from HD Video equipment
1
Press MENU to display the Menu screen.
2
Press \/| to select "SETUP".
3 Press '/" to select "HDMI SETUP", and press
ENTER.
4 Press '/" to select the desired item, and press
ENTER.
5
Press '/" to select the desired setting, and press
ENTER.
(Example: SIGNAL TYPE)
22
HDMI cable
(commercially available)
To HDMI
To HDMI output
terminal
terminal
Selected
Setting options
item
SIGNAL RGB
TYPE YCbCr 4:4:4
YCbCr 4:2:2
COLOUR AUTO
MATRIX ITU601
ITU709
AUTO VIEW ENABLE
DISABLE
6
Press MENU to exit.
A
• When you connect to the HDMI terminal with the DVI-HDMI
conversion cable, it may not be possible to display the picture
correctly.
• "HDMI SETUP" can be adjusted only when "HDMI" is selected as
an input mode. (See page 10.)
• Refer to your external equipment operation manual for the signal
type.
Description
Select the video signal type
from the HDMI terminal.
User settings for this item
are normally in effect only
when the TV is connected
with a DVI-HDMI conver-
sion cable.When connected
to an HDMI device, the TV
automatically detects the
"Signal Type" and ignores
user settings.
Select the video colour ma-
trix type when a YCbCr sig-
nal is input.Select the YCbCr
colour system when a YCbCr
signal is input.When an RGB
signal is input, the settings
for this item are ignored.
"Auto" should normally be
selected.
Set whether or not to use
WIDE MODE based on sig-
nal recognition, including an
HDMI signal.