Display Mode; Av3 In/Out - Sharp LC-20AX7X Operation Manual

DISPLAY MODE

You can turn over the picture on the screen by this function.
Directly setting the Display mode
1
Press DIS.MODE to display the Display mode screen.
2
Press DIS.MODE to change the setting.
DISPLAY MODE [NORMAL]
DISPLAY MODE [UPSIDE DOWN]
Setting on the Menu screen
1
Press MENU to display the Menu screen.
2
Press \/| to select "SETUP".
3
Press '/" to select "DISPLAY MODE", and press
ENTER.
4
Press '/" to select the desired mode, and press
ENTER.
5
Press MENU to exit.
[NORMAL]: Normal image is
displayed.
ABC
[UPSIDE DOWN]: To display upside
down images for special uses.
A B C
DISPLAY MODE [MIRROR]
DISPLAY MODE [ROTATE]
[MIRROR]: To display mirror
images for special uses.
C B A
[ROTATE]: To display rotated
images for special uses.
Useful Features (Continued)

AV3 IN/OUT

You can select the AV3 IN/OUT terminal as input terminals or
output terminals.
1
Perform steps 1 to 2 of DISPLAY MODE on the Menu
screen.
2
Press '/" to select "AV3 IN/OUT", and press ENTER.
3
Press '/" to select the desired mode, and press
ENTER.
4
Press MENU to exit.
A
• [IN]: AV3 IN/OUT terminals selected as input terminals.
[OUT ]: Line output is selected, output volume is fi xed and
speaker output is available.
[OUT ]: Line output is selected, output volume is variable and
speaker output is set to mute.
• "AV3 IN/OUT" cannot be set when "AV3" is selected as an input
mode.
21