Channel Setting (Auto); Channel Setting (Manual) - Sharp LC-20AX7X Operation Manual

Preset (Continued)

Channel Setting (AUTO)

1
Press MENU to display the Menu screen.
2
Press \/| to select "SETUP".
3
Press '/" to select "CH SETUP", and press ENTER.
4
Press '/" to select "AUTO", and press ENTER.
5
Press '/" to select "SOUND SYSTEM". Each
time you press \/|, the setting for individual items
changes as shown in the table on the right.
6
Press '/" to select "START SEARCH", and press
ENTER to begin the automatic programme search.
7
When the automatic programme search is completed,
the channel fi rst received will be displayed.

Channel Setting (MANUAL)

1
Perform steps 1 to 3 in Channel Setting (AUTO).
2
Press '/" to select "MANUAL", and press ENTER.
3
Press '/" to select the desired adjustment item.
4
Each time you press \/|, the setting for individual
items changes as shown in the table on the right.
5
Press MENU to exit.
14
Selected item
The channel position changes to the upper or lower
POSITION
number.
COLOUR SYSTEM The mode changes in the following order:
AUTO PAL
PAL60 N443
SOUND SYSTEM The mode changes in the following order:
B/G I D/K
The mode changes in the following order:
SKIP
ON OFF
Channel numbers with a " (RED)" mark on the left are
set to skip.
To turn off Skip, press Channel Select to select the
desired channel, and then set the Skip mode on the CH
setup menu to "OFF".
FINE The frequency changes to allow fi ne tuning.
The broadcast sound system changes in the following
NICAM
order:
ON (NICAM sound)
Stereo system changes in the following order:
A2
ON (A2 sound)
A
• Switching Colour system:
Set the system to Auto for normal TV reception. The Auto mode
automatically detects the receiving signal system and changes
the reception system of the LCD TV set. When the picture or
sound is not stable, switching to an appropriate system may
improve the picture or sound quality.
• When using Fine tuning, the channel number changes from
green to yellow.
• To return the channel to its original frequency setting, follow the
manual channel preset procedure. (For details, see "Presetting
the Channels (MANUAL)" on page 13.)
Description
SECAM
N358
M
OFF (Monaural TV sound)
OFF (Monaural TV sound)