Fuses; Choke Control; Cutting Height Pedals - Husqvarna PZ5426 FX / 966060901 Operator's Manual

Fuses

Fuses are located on the right hand side of the
machine. They are accessed by tilting the seat
forward. Fuses are flat pin fuses type as used in
automobiles.
There are three fuses with ratings and functions:
1. 20 A, Primary fuse.
2. 7.5 A, Mower deck coupling.
3. 10 A, Accessories

Choke Control

Gas models only - The choke control is used for cold
starts in order to provide the engine with a richer fuel
mixture.
For cold starts the control should be pulled out to its
extent.

Cutting Height Pedals

The cutting height pedals release the deck lift to allow
setting the desired deck height. Apply pressure to the
lift pedal and rotate foot to also apply pressure to the
release pedal, unlocking the deck lift.
For transport, push the lift pedal fully forward until the
deck lift latches in the transport (highest) position.
24
CONTROls
Fuses
Choke control
1. Lift pedal
2. Release pedal
Cut height selection pedals
2
1
8011-420
8065-004
8065-017