Running - Husqvarna PZ5426 FX / 966060901 Operator's Manual

Running

1. Release the parking brake by moving the lever
downward.
NoTE: The mower is equipped with an operator
presence system. When the engine is running,
any attempt by the operator to leave the seat
without first setting the parking brake will shut
off the engine.
2. Move the steering controls to the neutral
position (N).
3. The cutting height can be set from 1"- 5"
(2.5 cm-12.7 cm) by setting the cutting height
pin into the desired hole. Release deck height
control by applying equal pressure to both
pedals.
Push foot pedal fully forward for transport
position. Set pin at desired cutting height. (Pin
is removed by rotating 180
to lower deck to selected setting.
OPeRaTION
.) Push pedals again
o
Release the parking brake
Cut height selection pedals
Set deck to selected cutting height
8065-006
8065-017
8065-016
35