OWC Mercury Elite-AL Pro Assembly Instructions Manual page 5

(Versions with eSATA ONLY)
Connect one of the multicolored power cables to the hard drive you are
installing in the upper drive position, and connect one of the red SATA
cables to the hard drive you are installing in the upper position, and
place the hard drive into the chassis.
(Versions with FireWire &
USB - Oxford 934 or 936)
Connect the combined power
and SATA cable to the back of
the hard drive you're installing
in the top bay. It's easiest to do
this with the drive positioned
towards the front of the chas-
sis, as shown, and then slide
the drive back to the mounting
position shown below.
Page 4