Table of Contents
Advertisement
If POWER SAVING mode is deactivated by
pushing [A], [M] and SLEEP, the monitor will
go back to black screen after the time you
set if there is no sound trigger during that
time.
If POWER SAVING mode is deactivated by
a sound trigger, the device will go back to
black screen approximately 8 seconds after
the last trigger.
Settings
The Setting Menu contains 11 submenus:
1. Auto Mute – Auto mute function automatically mutes the volume of the
receiver when there are only slight environmental noises on camera side.
2. Time Alarm – Sets the wake time if the device's alarm clock setting is used.
3. Screen Saver – Choose from 5 preloaded pictures to display while in
standby mode.
4. Date Setting – Sets the year, month, date value to show in the monitor
screen
5. Time Setting – Sets the hour, minute, AM/PM value to show in the monitor
screen
6. Trigger Alert – Select the type of alert when audio is detected on the camera.
7. Temp. Unit – Select the temperature unit.
8. Temperature Alert – Sets the temperature alert range. When temperature on
camera side is out of the set range, the monitor will be alerted.
9. A/V Out – Chooses the TV system for A/V output.
10. Factory Reset – Choose Yes to reset the receiver to factory defaults. All
menu settings will be reset.
NOTE: Resetting the receiver will not reset all camera pairing.
11. Pairing – Use the pairing menu to add camera(s) to the receiver.
17
Hide quick links:
Advertisement
Table of Contents
