Hide thumbs Also See for SEW3041W:

Advertisement

o
VerVIeW
Getting to know your Monitoring system
Wireless Monitor
After opening the box, fully charge the monitor before use. After initial charge, recharge as needed.
Front Controls
Monitor Antenna
Receives and sends signals from or to the camera.
Indicator turns green when powered.
When battery is charging, this LED will in green color.
Sound Level Leds
Flashes when sound is detected.
Displays video from the camera.
Navigation Controls /
Viewing Mode: The following controls are used while watching live video from the camera:
• Press the [ $ ] or [ % ] button to adjust camera's framing upwards or downwards.
• Press the [ _ ] or [ + ] button to adjust camera's framing to the left or right.
• Press [
] button to turn on/off the night light.
• While in zooming, use [$/%/_/+] button to move the screen around.
10 · Overview
Power Led
4.3" LCd Screen
Button
MeNu Button
Press to access from video monitor mode to menu
mode operation. In menu mode, press this button will go
back to monitor mode with save from selection.
SLeeP Button
Used to turn on / off the screen by press this button.
User can turn on the video again by pressing any buttons.
If camera is disconnected, monitor screen would be
turned on automatically in Sleep mode.
Microphone
When there are pairing between monitor and camera,
There is a function of transmission of audio only.
Navigation Controls / oK/Night light Button
1.
Used to navigate while in Menu Mode.
2.
Used for PTZ operation and Night Light while in
Viewing Mode.
Menu Mode: Use the [$/%/_/+] button arrows to navigate in Menu Mode.
Press the [
] button to confirm the menu selection.

Advertisement

Table of Contents
loading

Summary of Contents for Samsung SEW3041W

  • Page 1 VerVIeW Getting to know your Monitoring system Wireless Monitor After opening the box, fully charge the monitor before use. After initial charge, recharge as needed. Front Controls MeNu Button Monitor Antenna Press to access from video monitor mode to menu Receives and sends signals from or to the camera.
  • Page 2: Side Controls

    Back Controls TALK Button Press down and hold the button to talk back to the camera. Kick Stand Speaker Use to hold the monitor onto a table. Produces the sound transmitted from the camera(s). You must have more than one camera configured on the system when using the functions that requires more than one camera. Side Controls Power and Vox oN / oFF Slide Switch Volume +/–...
  • Page 3: Wireless Camera

    Wireless Camera Front & Back Controls Ir Leds Night Light Button Infrared LED’s provide viewing in no / low light Turns Night Light ON or OFF. conditions. When the camera is powered on, Night Light would be automatically turned on. Microphone Receives sounds for the area near the camera, and Camera Antenna...
  • Page 4: How To Install

    Carefully unpack the camera. nstallatIon If you are installing cameras that did not come with the system, please see the pairing camera section of this manual for details on installation. Mount the camera to the wall. How to Install Mark the position of the screw hole on the wall, and drill hole and insert 1 screw, then firmly attach the CAUTION: If you use the system to watch a young child, do not place the camera in the camera to the wall by placing the stand over the...
  • Page 5: Specifications

    Item Details ppendIx Wireless Camera Pan Angle 300° Specifications Tilt Angle 110° Regulation Compliance FCC/CE Item Details RoHS Compliance Yes for CE version only System General Audio Built in Microphone/ Speaker Operating Frequency Range 2400 MHz~2483.5 MHz Weight 218g Transmitting Power 17dBm Max Wireless Monitor Monitor Sensitivity...
  • Page 6: Troubleshooting

    Troubleshooting Problem Solution No picture from a 1. Check all connections to the camera. Make sure the adapter is plugged in. camera 2. Make sure that the cameras and monitor are both ON. 3. Make sure that the camera is in range of the monitor. 4.
  • Page 7: Correct Disposal Of Batteries In This Product

    Correct Disposal of This Product Samsung Techwin cares for the environment at all product manufacturing stages, and is taking measures to provide customers with more environmentally friendly products. (Waste Electrical & Electronic Equipment) The Eco mark represents Samsung Techwin’s devotion to creating environmentally friendly products, and indicates that the product satisfies the EU RoHS Directive.
  • Page 8: Camera Front

    TEMPLATE Screw holes for This template is used to install the Camera the camera on the wall. installation CAMERA FRONT...
  • Page 9 SALES NETWORK SAMSUNG TECHWIN CO., LTD. Samsung Techwin R&D Center, 6, Pangyo-ro 319beon-gil, Bundang-gu, Songnam-si, Gyeonggi-do 463-400, Korea TEL : +82-70-7147-8740~60 FAX : +82-31-8018-3745 SAMSUNG TECHWIN AMERICA Inc. SAMSUNG TECHWIN EUROPE LTD. 100 Challenger Rd. Suite 700 Ridgefield Park, NJ 07660...

Table of Contents