™ User Manual SEW-3035 If you have additional questions or need further assistance, contact Samsung support at (877) 349-3149. To extend your one year warranty by three months, be sure to go to www.samsungsv.com and register your product. SEW-3035-ENGLISH.indd 1...
Samsung Techwin Co., Ltd. The name of this product is the registered trademark of Samsung Techwin Co., Ltd. • To prevent entanglement with adapter cords, NEVER PLACE THE CORD IN OR NEAR A CRIB OR PLAYPEN.
• Do not use extension cords with the AC power adapters to avoid entanglement. • This product should only be serviced by qualified and authorized Samsung service centers. How to Install ………………………………………………… 9 • Images and sounds are transmitted by the product over public airwaves and transmissions may be picked up by other units.
The system comes with the following components: Features • Samsung’s digital wireless technology provides excellent image quality and clarity. • Virtually eliminates interference using a secure and private signal SEW-3035 • Up to 350ft (about 100m) wireless open space transmission range.
Getting to know your Monitoring system Wirelessreceiver After opening the box, fully charge the monitor before use. After initial charge, recharge as needed. FrontControls receiverAntenna MenuButton Receives and sends signals from or to the camera. Press to access the receiver menu. Press the button again to exit.
BackControls A/Mrecord AntennaLockingSwitch Press to auto record or manual record during monitoring. Slide the switch to unlocking position, the receiver antenna Only available when the Micro SD card is inserted.* will pop up. REC [A] : Start recording when an alarm is detected. Then you can adjust the antenna for better signal reception.
WirelessCamera Front&BackControls CameraAntenna nightLightSwitch Sends & receives signals to or from the receiver. Press to turn the night light ON or OFF. Alternatively, press the light button on the receiver to remotely turn the camera light ON or OFF. Lens/irLedCover Infrared LED’s provide viewing in no/low light TemperatureSensor conditions.
SideControls Cameraon/oFFSwitch SoundAlarmTrigger Turns the camera ON or OFF. Adjust the sensitivity knob to set the sound alarm sensitivity. The receiver will beep to alert you when the sound is above a preset sound level. Cameraonandlowbatteryindication Adjust to increase or decrease the level of sensitivity. Turn on the camera, the LED light will blink green once;...
Carefullyunpackthecamera. nStallation If you are installing cameras that did not come with the system, please see the pairing camera section of this manual for details on installation. Mountthecameratothewall. How to Install Mark the position of the screw holes on the wall, and drill holes and insert 2 screws, then firmly Caution if you use the system to watch a young child, do not place the camera where the attach the camera to the wall by placing the...
nightlight Viewing Mode Display Press [ ] in the wireless receiver to remotely turn on/off the night light on the wireless camera currently being displayed. An indicator light will be visible if on. Wirelessreceiver AutoMute If you set Auto Mute to <YeS>, the applicable message appears on the screen. MicroSdcardstatus Indicates when a Micro SD card is inserted.
peration powerSaving Enables receiver power save mode (when no activity on the camera is detected). The Power Saving Menu is used to turn off the screen at a predetermined time, Menu Operation to conserve battery power. After selected time, the monitor will go to a select screen saver or black screen if blank is selected as the screen saver.
pairingCamera AlarmSetting Sets the time value with HH, MM and select the ON or OFF to decide alarm or Power on and turn the switch to ON. not. The power LED for the camera and receiver should be ON. dateSetting Press the [Menu] button on the receiver.
MicroSD memory cards. You may ™ experience compatibility issues depending on the model and maker of the memory card. For your Samsung BabyVIEW baby monitor, we recommend you use a MicroSD ™ memory card from the following manufacturers: Sandisk and Kingston .
Using Your Monitor with Skype Using Your Monitor with MSN ™ ™ Install USB Driver (see previous section). Install USB Driver (Page 13). Connect your monitor to a PC. Connect your monitor to a PC. Your monitor Your monitor should indicate that it is in "uSBpC should indicate that it is in "uSBpCCAMerA CAMerAMode".
Specifications Item Details Item Details Camera Receiver Transmit Frequency Range 2.400GHz~2.4835GHz Receiving Frequency Range 2.400GHz~2.4835GHz Data Rate 2.0 Mbps Monitor 3.5” Color LCD Transmitting Power 16dBm (MAX) Data Rate 2.0 Mbps Modulation Type GFSK Receiving Sensitivity -81dBm Transmitting Distance 350ft (about 100m) / (Line of Sight) Demodulation Type GFSK Image Sensor Type...
Troubleshooting Samsung Techwin cares for the environment at all product manufacturing stages, and is Problem Solution taking measures to provide customers with more environmentally friendly products. The Eco mark represents Samsung Techwin’s devotion to creating environmentally friendly The monitor beeps The unit may be beeping or vibrating because the sound sensitivity on the products, and indicates that the product satisfies the EU RoHS Directive.
67mm[2.6inch] TEMPLATE Screw holes for the Camera installation This template is used to install the camera on the wall. CAMERA FRONT SEW-3035-ENGLISH.indd 17 2011-04-13 오후 5:37:32...
SAMSUNG TECHWIN AMERICA Inc. SAMSUNG TECHWIN EUROPE LTD. 100 Challenger Rd. Suite 700 Ridgefield Park, NJ 07660 Samsung House, 1000 Hillswood Drive, Hillswood Business Park Chertsey, Toll Free : +1-877-213-1222 Direct : +1-201-325-6920 Surrey, UNITED KINGDOM KT16 OPS Fax : +1-201-373-0124 TEL : +44-1932-45-5300 FAX : +44-1932-45-5325 www.samsungsv.com...