Samsung SEW-3030 User Manual page 14

Connecting Camera Power
The camera can be powered either by using the provided power adaptor or
using batteries (requires 3 AA type batteries, not included).
NOTE: Wireless cameras require a power source (either an electrical outlet or
battery power) to operate.
If you plan to permanently mount the camera in a location, it is recommended to
use the included camera power adaptor to prevent interruptions in the image,
as using battery power is intended as a temporary power solution.
Power Adaptor
Connect the power adaptor to the
camera. Make sure the power adaptor is
placed into a grounded outlet or surge
bar to protect the camera from power
fluctuations.
Battery Pack - Camera
1. Remove the battery cover from the
base of the camera.
2. Insert 3 AA batteries (not included) into
the Battery Pack. Make sure to correctly
line up the Positive (+) and negative (-)
terminals of the batteries.
3. Replace the battery pack cover.
NOTE: If the camera is used with the
included power adaptor and batteries,
the batteries will not be used.
The batteries are intended for short term,
portable camera use only.
13