Table of Contents
Advertisement
5. Microphone – Receives sounds for
the area near the camera, and
transmits sound from the camera to the
receiver.
6. Pair Button – The pair button is
located on the back of the camera
behind by the stand mount.
7. Charging Indication LED – LED is
off when there is no rechargeable
battery inside the camera base; the
LED is red when the rechargeable
battery pack is charging; the LED is green when the rechargeable battery is
fully charged.
8. DC 5V Power Input – Connect the AC power adaptor to the camera.
NOTE: The camera can also be powered using 3 AA batteries (not included)
installed in the base. If the camera is plugged in with the AC adaptor, the
batteries will not be used. The batteries are intended for short term, portable
camera use.
10
Hide quick links:
Advertisement
Table of Contents
