Splash Screen
3 Sec IntervaL
Initial warning
ok
all helms active
warnInG
8-2
8.2 Initial Start Up
Turning on the ignition switch will turn on the Optimus 360 system.
The CANtrak Display will turn on and steering will become active at
all helms.
After reading the initial warning screen press the INFO button and
follow the prompts for a system inspection.
Figure 8-2. CANtrak initial warning screen.
Info
System check 1
Figure 8-3. All Helms Active screen (normal steering mode).
on muLtIpLe heLm StatIon boatS aLL SteerInG heLmS are actIve
when the optImuS 360 IS turned on. thIS IS the Same aS you
wouLd fInd on a conventIonaL hydrauLIc SteerInG SyStem.
© 2012 SeaStar Solutions
neXt
System check 2
back
ok
Optimus 360 User's Manual, Rev. C
neXt
System check 3
back