Appendix C Trailering And Storage - Seastar Solutions Optimus 360 Operating Instructions & User Manual

warnInG
STEERING
LOCK CLIPS
(SEE WARNING)
b-2
AppENDIX c
Trailering and Storage
When trailering or storing a boat equipped with an Optimus 360
system, install the steering lock clips to all steering cylinders as
shown below. These clips keep the engines from drifting, preventing
contact with other components which may result in scuffing or
cowling damage. Simply center the engines and snap the clips over
the cylinder shafts to install.
enSure SteerInG Lock cLIpS are removed before operatInG
boat. faILure to remove SteerInG Lock cLIpS wILL reSuLt
In no SteerInG controL.
Alternatively, or if the clips are not available, steer the engines all
the way to one side after tilting them up. The weight of the engines
will keep them from shifting.
Figure C-1. Steering cylinder lock clips.
© 2012 SeaStar Solutions
STEERING
LOCK CLIPS
(SEE WARNING)
STEERING
CYLINDER
Optimus 360 User's Manual, Rev. C