Mounting And Connections; Mounting And Connecting Tips - XTZ 89 FRONT Owner's Manual

Mounting and connecting tips

Mounting options
Spikes
Correct phase when
connecting
Overloading
Initial use of your
speakers
Normally the XTZ 89 FRONT is placed near a
TV set or a projector screen. The wall behind
affect the reproduction of the speaker and
characteristics. Please take your time to try
out the best placement.
The XTZ 89 FRONT is equipped with rubber feet,
intended for vibration-muffling, making the use of
spikes unnecessary.
Always make sure the speaker is connected
in respect of the correct phase. The +
terminal of the amplifier should be
connected to the + terminal of the speaker.
After playing at a very high sound level for a
prolonged period of time there is a risk of
damaging the speakers and/or the
amplifier.
The drivers of a loadspeaker require about
50 to 100 hours of use before the full quality
level is reached.
speaker can be used normally.
During this time the
- 8 -
.
If the center speaker is
incorrectly connected to the
amplifier, there is no risk of
damage or danger. However,
the sound will not be
reproduced correctly.