Table of Contents
Advertisement
Advertisement
Table of Contents
Related Manuals for XTZ 80.1 FRONT
Summary of Contents for XTZ 80.1 FRONT
-
Page 1: Owners Manual
XTZ 80.1 FRONT Full Range Speaker Owners Manual © 2008 XTZ AB , www.xtz.se... -
Page 2: Table Of Contents
Appendix Page: Introduction About XTZ Technical presentation Preparations Tips for installation and placement Mounting and connections Sound settings Technical specifications Service & Troubleshooting - 2 -... -
Page 3: Introduction
Introduction Introduction We would like to thank you for buying XTZ 80.1 Front. The XTZ 80.1 Front offers a large numbers of possibilities. In order to utilize your new speakers in the best possible way, please read this manual carefully before using your speakers for the first time. -
Page 4: Technical Presentation
Technical presentation Cabinet design The cabinet is constructed with a narrow baffle - not only an ecstatically neat shape but also an advantage in terms of sonic performance since the more stable structure effectively reduces resonances in the cabinet. The cabinet is made from 21mm MDF board, which provides good sonic qualities. -
Page 5: Preparations
Preparations Unpacking Carefully unpack the loudspeaker, and pay attention not to damage anything. If possible, please keep the cardboard box for future transports. If you find any damages, please contact your dealer immediately. Accessories 2 Bass reflex plugs 1 Owners manual - 5 -... -
Page 6: Tips For Installation And Placement
Tips for installation and placement This chapter contains general information about installing and placing your speakers. These are general hints and tips, so there may be exceptions. What room will Even the most competent HiFi equipment will provide the best sound mediocre in the wrong environment. - Page 7 Front speakers In order to obtain the correct stereo perspective the loudspeakers should be placed symmetrically in front of the listener. The distance between the speakers should be roughly 80% of the distance between the listener and one of the speakers. Or put in another way, the angle seen by the by the listener should be about 45 degrees, as shown on the picture.
-
Page 8: Mounting And Connections
The wall behind affects the reproduction of the speaker and characteristics. Please take your time to try out the best placement. Spikes The XTZ 80.1 FRONT is equipped with rubber feet, intended for vibration-muffling, making the use of spikes unnecessary. Correct phase when... -
Page 9: Sound Settings
By putting the supplied bass reflex plugs into Mechanical the port, you can alter the lower boundary adjustment of the frequency of the XTZ 80.1 FRONT. Also, the boundary frequency treble level might be adjusted in order to adapt the speaker to your listening room/ preference. -
Page 10: Technical Specifications
Technical specifications Type of construction 2½-way bass reflex box which is mechanically adjustable in four different modes (Room- Tuning). Tweeter is adjustable in 2 levels Dimensions 1000 x 200 x 300 mm (Height x Width x Depth) Weight 20,3 kg Magnetically shielded Connectors... -
Page 11: Service & Troubleshooting
Please be support@xtz.se sure to enclose a copy of your receipt, and a short description of the Website: www.xtz.se problems/defects. Support Contact our free of charge support regarding service or if you need advice during installation.