Tire Psi; Units - RAM Truck Gas 2012 Owner's Manual

Tire PSI

Press and release the UP or DOWN button until "Tire
PSI" displays in the EVIC and press the SELECT button.
This will display the Tire Pressure Monitor System
(shows the current pressure of all four road tires). For
additional information, refer to "Tire Pressure Monitor
System" in "Starting And Operating".
Tire Pressure Display
UNDERSTANDING YOUR INSTRUMENT PANEL 279
NOTE:
• Tires heat up during normal driving conditions. Heat
will cause the tire pressure to increase from 2 to 6 psi
(14 to 41 kPa) during normal driving conditions. Refer
to "Tires-General Information/Tire Inflation Pres-
sures" in "Starting And Operating" for additional
information.
• Your system can be set to display pressure units in PSI,
kPa, or BAR.

Units

Press and release the UP or DOWN button until "Units"
displays in the EVIC and press the SELECT button. The
EVIC, odometer, and navigation system (if equipped) can
be changed between English and Metric units of mea-
sure. To make your selection, scroll up or down until the
preferred setting is highlighted, then press and release
the SELECT button until a check-mark appears next to
the setting, showing that the setting has been selected.
4