Installing A Hard Disk Drive - Fujitsu ESPRIMO P4 Series Operating Manual

System expansions

Installing a hard disk drive

► Open the casing (see
Harddisk drive,
► Take the new hard disk drive out of its packaging.
► Slide the hard disk drive into the casing (1). Make sure that the screw holes are aligned.
► Press gently against the hard disk drive from below and secure it with the screws (2).
► Connect the cables (data cable, power supply) to the drive.
Check that the polarity is correct and do not use any force.
► Close the casing (see
38
"Opening the casing", Page
"Closing the casing", Page
31).
2
2 2
2
32).
Fujitsu Technology Solutions