Fujitsu ESPRIMO P4 Series Operating Manual page 30

Troubleshooting and tips
Cause
Wrong monitor has been set under Window XP
Incorrect setting for the monitor in Windows Vista ► Restart the device.
Wrong monitor has been set under Windows 7
26
Remedy
► Restart the device.
► Press F8 while the system is booting.
Either the Windows Advanced Start Options menu
or the menu for selecting the operating system
appears.
► If the menu for selecting the operating
system appears, press
► Select Safe Mode or Safe Mode with Network.
► Go to Start – Settings – Control Panel – Display
and the tabs Appearance, Themes, Settings
to set the correct values for the connected
monitor as described in the operating
manual of the monitor.
► Press F8 while the system is booting.
Either the Windows Advanced Start Options menu
or the menu for selecting the operating system
will appear.
► If the menu for selecting the operating
system appears, press the
► SelectSafe Mode or Safe Mode with Network.
► Go to Start symbol – (Settings) – Control
Panel – Appearance and Personalization –
Personalization and enter the correct values
for the connected monitor as described in
the operating manual of the monitor.
► Restart the device.
► Press F8 while the system is booting.
Either the Windows Advanced Start Options menu
or the menu for selecting the operating system
appears.
► If the menu for selecting the operating
system appears, press
► Select Safe Mode or Safe Mode with Network.
► Go to Start – Control Panel – Appearance
and Personalization – Display to enter the
correct values for the connected monitor as
described in the operating manual of the
monitor.
F8 .
F8 key.
F8 .
Fujitsu Technology Solutions