Indicators On The Device - Fujitsu ESPRIMO P4 Series Operating Manual

Indicators on the device

Device Indicators,
The indicators are on the front of the casing. Which indicators are available on your
device depends on the configuration level you have selected.
1 = Drive indicator, e.g. DVD
2 = Power-on indicator
No. Indicator
1 Drive indicator
2 Power-on indicator
3 Hard disk indicator
Fujitsu Technology Solutions
3 = Hard disk indicator
Description
The indicator lights up when the CD-ROM or DVD drive in the
device is accessed. Never under any circumstances remove the
CD/DVD while the indicator is lit.
Caution: When energy saving mode is active, the device must
not be switched off at the main power switch (if present) or
disconnected from the mains, as this may result in data loss.
• The indicator lights up white:
The device is switched on.
• The indicator flashes white:
The device is in energy-saving mode. After being switched on
with the ON/OFF switch, the device powers up or returns to the
state it was in before it entered energy-saving mode.
• The indicator is not lit:
The device is switched off.
The indicator lights up blue when the hard disk drive in the device
is being accessed.
1
2
3
Operation
19