Register Modify/Display - Motorola M68HC11EVBU User Manual

OPERATING INSTRUCTIONS
RM

4.6.14 Register Modify/Display

RM [p, y, x, a, b, c, s]
The RM command is used to modify the MCU program counter (P), Y index (Y), X index (X), A
accumulator (A), B accumulator (B), condition code register (C), and stack pointer (S) register
contents.
Examples:
>RM<CR>
P-0108 Y-7982 X-FF00 A-44 B-70 C-C0 S-0047
P-0108 0100<CR>
>
>RM X<CR>
P-0100 Y-7982 X-FF00 A-44 B-70 C-C0 S-0047
X-FF00 1000<CR>
>
>RM<CR>
P-0100 Y-7982 X-1000 A-44 B-70 C-C0 S-0047
P-0100 (SPACE BAR)
Y-7982 (SPACE BAR)
X-1000 (SPACE BAR)
A-44 (SPACE BAR)
B-70 (SPACE BAR)
C-C0 (SPACE BAR)
S-0047 (SPACE BAR)
>
4-28
Register Modify/Display
Display P register contents.
Modify P register contents.
Display X register contents.
Modify X register contents.
Display P register contents.
Display remaining registers.
Entering a (SPACE BAR) following the stack pointer
display will terminate RM command.
M68HC11EVBU/D