Maintenance - Vorwerk Kobold System VK 140 User's Manual & Instructions

62
FIGURE 38
FIGURE 39
Assembly & Use
Thanks to its rotating and tilting joint
nozzle the reaches effortlessly
EB 360
hard-to-reach spots.
(FIGURE 38)
For vacuuming under furniture with
reduced floor access swivel both appliances
fully flat against the floor.
(FIGURE 39)

Maintenance

I
EB 360
Maintenance
From time to time we recommend checking
if the is clean.
EB 360
If the becomes clogged, open the
EB 360
hatch on the bottom and remove the
blockage, then close the hatch.
It threads become tangled around the
brushes, remove the brushes and then clean
away the threads.
(FIGURES 40 & 41)
Anti-damadge block
If you accidentally suck up something big
or if the mattress lining is a little loose and
the suction power of the Kobold VK 140 is
too high, the EB 360 automatically cuts-out
while the Kobold VK 140 continues to
operate at the set power.
The blinking green operating light (on)
indicates a blockage.
(FIGURE 42)
Switch off the appliance, remove the plug
from the mains socket and remove the
trapped object from the EB 360. Switch the
Kobold VK 140 on again at minimum power
level "1".
L
Stay away from rotating brushes of the
electronic brush.
63
FIGURE 40
FIGURE 41
FIGURE 42