Avalue Technology EMX-945GSE Series User Manual page 52

EMX-945GSE Series
correct password is not entered at the prompt.
The system will boot, but access to Setup will be denied if the correct
Setup
password is not entered at the prompt.
To disable security, select PASSWORD SETTING at Main Menu and
then you will be asked to enter password. Do not type anything and just
press <Enter>, it will disable security. Once the security is disabled, the
system will boot and you can enter Setup freely.
2.3.2.11 APIC Mode
This setting allows you to enable the APIC mode. The choices are "Disabled" or "Enabled."
2.3.2.12 MPS Version Control for OS
This option is only valid for multiprocessor motherboards as it specifies the version of the
Multiprocessor Specification (MPS) that the motherboard will use. The MPS is a
specification by which PC manufacturers design and build Intel architecture systems with
two or more processors.
MPS 1.1 was the original specification. MPS version 1.4 adds extended configuration
tables for improved support of multiple PCI bus configurations and greater expandability in
the future. In addition, MPS 1.4 introduces support for a secondary PCI bus without
requiring a PCI bridge.
2.3.2.13 Small Logo (EPA) Show
This item allows you enabled/disabled the small EPA logo show on screen at the POST
step.
Item
Enabled EPA Logo shows is enabled
Disabled EPA logo show is disabled
52 EMX-945GSE Series User's Manual
Description