Switching On And Off - Miele CM 5200 Operating Instructions Manual

You can use the On/Off button -
(standby) to switch the coffee machine
on and off, if the master switch at the
back of the machine is switched on.
Switching on
When the machine is switched on, it
heats up and rinses out the pipework.
This cleans and heats the pipework
ready for coffee preparation. After
rinsing, hot water will run into the drip
tray.
TIP If you do not want the water from
the rinsing process to flow into the drip
tray, place a suitable container
underneath the central spout before
preparing the first coffee of the day.
If the coffee machine still has an
operating temperature which is higher
than 60 °C, then rinsing will not take
place.
^ Press the On/Off button -.
The following will appear in the display:
HEATING-UP PHASE
The following appears in the display
after heating up:
RINSING
Hot water will be dispensed from the
central spout.
The main menu will then appear in the
display:
SELECT TYPE OF DRINK
You can now prepare drinks.

Switching on and off

Switching off
^ Press the On/Off button -.
The coffee machine rinses the coffee
pipework before switching off.
If you have made a drink with milk, the
following message appears in the
display:
RINSE THE
MILK SYSTEM
^ Press the OK button to rinse the milk
system
^ Follow the instructions given in the
display.
The milk system is rinsed out.
If the milk system is not rinsed out
before switching off, the message
RINSE THE MILK SYSTEM or CLEAN
THE MILK SYSTEM will appear in the
display next time the machine is
switched on.
Follow the instructions in the display
next time the machine is switched
on (see "Rinsing the milk system").
TIP To save energy, use the master
switch at the back of the coffee
machine to switch it off if it is not going
to be used for a long period of time,
e.g. during holidays.
Please note that the time of day will not
be saved and must be entered again
the next time the coffee machine is
switched on.
19