Signal Menu - Epson EH-TW480 User Manual

List of Functions
Submenu
Color Adjust- You can adjust the color strength for Red, Green, and Blue
ment individually.
(This item cannot be selected if Color Mode is set to Living
Auto Iris
Room.)
Set to On to adjust the iris to obtain the optimum light for images
being projected.
The setting is stored for each Color Mode.
s "Setting Auto Iris"
You can reset all adjustment values for the Image menu to their
Reset
default settings. See the following to return all menu items to
their default settings.
s "Reset Menu"

Signal Menu

Settable items vary depending on the image signal and source currently
being projected. Setting details are saved for each image signal.
You cannot make settings on the Signal menu when the source is USB
Display or USB.
Function
p.35
p.64
"Automatically Detect Input Signals and Change the Projected Image
s
(Source Search)" p.24
Submenu
Set to On to automatically adjust Tracking, Sync., and Position to
Auto Setup
the optimum state when the input signal changes.
Resolution Set to Auto to automatically identify the resolution of the input
signal. If images are not projected correctly when set to Auto, for
example if some of the image is missing, adjust to Wide for wide
screens, or set to Normal for 4:3 or 5:4 screens depending on the
connected computer.
You can adjust computer images when vertical stripes appear in
Tracking
the images.
Sync. You can adjust computer images when flickering, fuzziness, or
interference appear in the images.
You can adjust the display position up, down, left, and right when
Position
a part of the image is missing so that the whole image is projected.
59
Function