Control Panel - Epson EH-TW480 User Manual

Part Names and Functions

Control Panel

Name
A
Turns the projector power on or off.
[t] button
s Quick Start Guide
B
Changes to the next input source that is sending an image.
[Source Search]
button
s "Automatically Detect Input Signals and Change the
Projected Image (Source Search)"
• When the Configuration menu or the Help screen is
C
[Enter] button
displayed, it accepts and enters the current selection and
[ ]
moves to the next level.
• If pressed while projecting analog RGB signals from the
Computer port, you can automatically optimize
Tracking, Sync., and Position.
Function
p.24
Name
• Displays the Keystone screen allowing you to correct
D
[w][v] buttons
keystone distortion in vertical and horizontal
directions.
s "Correcting manually"
• If pressed when the Configuration menu or the Help
screen is displayed, these buttons select menu items and
setting values.
s "Using the Configuration Menu"
s "Using the Help"
E
Displays and closes the Help screen which shows you how
[Help] button
to deal with problems if they occur.
s "Using the Help"
• Stops the current function.
F
[Esc] button
• If pressed when the Configuration menu is displayed, it
moves to the previous menu level.
s "Using the Configuration Menu"
• [a] Decreases the volume.
G
[a][b] buttons
[b] Increases the volume.
s "Adjusting the Volume"
• Corrects keystone distortion in the horizontal direction
when the Keystone screen is displayed.
s "H/V-Keystone"
• If pressed when the Configuration menu or the Help
screen is displayed, these buttons select menu items and
setting values.
s "Using the Configuration Menu"
s "Using the Help"
H
[Menu] button Displays and closes the Configuration menu.
s "Using the Configuration Menu"
10
Function
p.30
p.56
p.66
p.66
p.56
p.34
p.30
p.56
p.66
p.56