Reset Menu - Epson EH-TW480 User Manual

List of Functions
"Automatically Detect Input Signals and Change the Projected Image
s
(Source Search)" p.24
Submenu
You can display the cumulative lamp operating time
Lamp Hours
When it reaches the lamp warning time, the characters are
displayed in yellow.
You can display the source name for the connected
Source
equipment currently being projected.
You can display the content of Input Signal set in the
Input Signal
Signal menu according to the source.
Resolution You can display the resolution.
You can display the refresh rate
Refresh Rate
You can display the image signal information.
Sync Info
This information may be needed if service is required.
You can display the settings for Video Signal in the Signal
Video Signal
menu.
Status This is information about errors that have occurred on the
projector.
This information may be needed if service is required.
Function
* .
g
.
Submenu
Serial Number Displays the projector's serial number.
* The cumulative use time is displayed as "0H" for the first 10 hours. 10 hours
and above is displayed as "10H", "11H", and so on.

Reset Menu

Submenu
You can reset all items in the Configuration menu to their default
Reset All
settings.
The following items are not reset to their defaults: Input Signal,
User's Logo, Lamp Hours, Language, Password, and User
Button.
Clears the cumulative lamp hours use time. Reset when you
Reset Lamp
Hours replace the lamp.
64
Function
Function