Correcting The Focus; Adjusting The Volume; Selecting The Projection Quality (Selecting Color Mode) - Epson EH-TW480 User Manual

Adjusting Projected Images

Correcting the Focus

You can correct the focus using the focus ring.

Adjusting the Volume

You can adjust the volume using one of the following methods.
• Press the [Volume] button on the control panel or the remote control
to adjust the volume.
[ ] Decreases the volume.
a
[ ] Increases the volume.
b
Using the remote control Using the control panel
• Adjust the volume from the Configuration menu.
Settings - Volume p.61
s
Caution
Do not start at high volume.
A sudden excessive volume may cause loss of hearing. Always lower the volume
before powering off, so that you can power on and then gradually increase the
volume.
Selecting the Projection Quality (Selecting Color
Mode)
You can easily obtain the optimum image quality simply by selecting the
setting that best corresponds to your surroundings when projecting. The
brightness of the image varies depending on the mode selected.
Mode
Ideal for use in a bright room.
Dynamic
Living Room Ideal for using the projector in a room with closed
curtains.
Ideal for watching films in a dark room. Gives images a
Theatre
natural tone.
• Ideal for playing games in a bright room.
Game
• It takes a few seconds to switch to Game mode.
• You can reduce screen lag by setting the input signal to
a progressive signal of 480p or 720p. See the
documentation supplied with your game console for
more information on adjusting the signal.
34
Application