Settings Menu - Epson EH-TW480 User Manual

List of Functions

Settings Menu

Submenu
You can correct keystone distortion.
Keystone
• When H/V-Keystone is selected:
Adjust V-Keystone and H-Keystone to correct horizontal
and vertical keystone distortion.
You can also set Auto V-Keystone and H-Keystone
Adjuster to On or Off.
• When Quick Corner is selected:
Select and correct the four corners of the projected image.
s "Quick Corner"
Control Panel You can use this to restrict operation of the projector's control
panel.
Lock
s "Restricting Operation (Control Panel Lock)"
Function
p.31
p.52
Submenu
Pointer Shape You can select the shape of the pointer.
Pointer 1:
Pointer 2:
Pointer 3:
s "Pointer Function (Pointer)"
You can set the lamp brightness to one of two settings.
Power Consump-
tion
Select ECO if the images being projected are too bright, such as
when projecting images in a dark room or onto a small screen.
When ECO is selected, the power consumption and the lamp's
operating life are changed as follows, and fan rotation noise
during projection is reduced.
Electrical consumption: about 17.5% decrease, lamp life: about
1.25 times longer
When the projector is used at a high altitude or in a location
subject to high temperatures, the ECO setting may be used
automatically. If this happens, Power Consumption is grayed
out and cannot be adjusted.
You can adjust the volume. Setting values are saved for each
Volume
source.
You can limit the reception of the operation signal from the
Remote Receiver
remote control.
When set to Off, you cannot perform any operations from the
remote control. If you want to make operations from the remote
control, hold down the [Menu] button on the remote control for
at least 15 seconds to reset the setting to its default value.
You can select and assign an item from the Configuration menu
User Button
with the remote control's [User] button. Pressing the [User]
button directly displays the assigned menu item selection/
adjustment screen, allowing you to make one-touch changes to
settings/adjustments. You can assign one of the following items
to the [User] button.
Brightness Control, Info, Progressive, Test Pattern,
Resolution
61
Function
p.45