Plena Loop Amplifier | Installation and User Instructions | Installation
The loop amplifier is sent to you in a box. Refer to table
3.1 for the contents of the box.
Always compare the contents of a shipment
with the descriptions on the shipment
table 3. 1 : Box
Important Safety Instructions
Installation & User Instructions
19" rack system brackets
Do not unpack the box until you install and
connect the loop amplifier.
Install the loop amplifier in a 19-inch rack system or on
a flat surface (refer to figure 3.1).
-2 0 dB
figure 3. 1 : Installation
Bosch Security Systems | 2005-05 | 9922 141 50672en
Int eg rity
Make sure that there is a free space of at least 100 mm
on both sides of the loop amplifier for ventilation. The
loop amplifier has a regulated internal fan, which keeps
the temperature of the electronics within the safe range.
table 3.2: Physical characteristics
Dimensions (h x w x d):
94 x 430 x 320 mm (19" wide, 2U high)
table 3.3: Environmental conditions
+5 to +45 °C
-25 to +55 °C
en | 19