Plena Loop Amplifier | Installation and User Instructions | Configuration
You can switch voice activation (Vox) of audio input 1
on and off with the Vox/Mix switch. The Vox/Mix switch
is on the rear of the loop amplifier (refer to figure 5.10).
To switch Vox on, set the Vox/Mix switch in the Vox
position. The audio signal of audio input 1 overrides
the audio signal of audio input 2.
To switch Vox off, set the Vox/Mix switch in the Mix
position. The audio signal of audio input 1 and the
audio signal of audio input 2 are mixed.
figure 5. 1 0: Vox/Mix switch
Bosch Security Systems | 2005-05 | 9922 141 50672en
en | 31