General Installation Procedures; Unpacking; Parts Included - Bosch SYNSONA PRM-4P600 Installation Manual

SYNSONA amplifiers
4

General installation procedures

Before starting installation, ensure the following:
–
–
–
–
–
–
4.1

Unpacking

The products should be unpacked and handled with care. If an item appears to be damaged,
notify the shipper immediately. If any items are missing, notify your Bosch representative.
The original packaging is the safest container in which to transport products and can also be
used to return products for service, if necessary.
4.2

Parts included

PRM-4P600
1
1
1
2
2
4
2
N/A
N/A
N/A
N/A
1
1
Bosch Security Systems B.V.
You make use of manufacturer specified installation materials.
No liquids can spill into or on the products.
Installation is in a clean environment free of dust.
The ventilation airflow of the 19" units is not obstructed.
There is a mains power outlet of sufficient rating close to the intended location of the
products.
Sufficient free space and access at the rear of the 19" units for connectors and wiring.
PRM-2P600
1
1
1
1
1
4
N/A
1
2
1
1
1
1
Component
Power amplifier
Mains cord
Euroblock remote connector 5‑pole
Euroblock input connector 6‑pole
Euroblock output connector 4‑pole
Rubber feet
19"‑rack mounting brackets (pre‑mounted)
M3 screw
Short rack ears
Long rack ear
Connection plate
Quick Installation Guide
Safety information
Installation manual
General installation procedures | en
2024.01 | V03 | F.01U.402.247
11