Xv) Bilge Pump System - BENETEAU 323 Owner's Manual

XV) BILGE PUMP SYSTEM
OPERATION
The pump is normally automatic but can be controlled manually from a switch on the main 12V panel. There is also a
reset push button on the panel. Be sure to clean the filter between the pump and sump carefully, at regular intervals. To
clean the filter, unscrew the body and wash out the filter screen.
WARNING! BE CAREFUL NOT TO WASH THE O-RING SEAL OUT OF THE FILTER.
Make sure the bilge pump system is in good working order before you put out to sea.
Acquaint yourself with the way the bilge pump system of your boat works:
- Locate the manual bilge pump and the handle.
- Locate the switch of the electric bilge pump.
(See the lay out drawing of the system - next page)
BEHIND STBD SETTEE
BENETEAU 323
Apr. 01, 2004
rev 00
PUMP STATION
BILGE / SHOWER
PUMP AND FILTER
Page 44 of 85