Table of Contents
Advertisement
HULL IDENTIFICATION NUMBER:
US-BEY _ _ _ _ _ _ _ _ _
OWNER'S MANUAL BENETEAU PART #: 111699
SUMMARY:
I)
INTRODUCTION............................................................................................................................... 3
ANTI-FOULING ................................................................................................................................ 4
WARRANTY ..................................................................................................................................... 5
HULL IDENTIFICATION NUMBERS............................................................................................... 7
DEALER'S RESPONSIBILITIES....................................................................................................... 7
OWNER'S/OPERATOR'S RESPONSIBILITIES ............................................................................... 8
SAFE OPERATION AND WARNING LABELS...............................................................................12
FEDERAL REGULATIONS..............................................................................................................17
COMMISSIONING ...........................................................................................................................20
SPECIFICATIONS OF THE BOAT...................................................................................................23
INTERIOR LAYOUT ........................................................................................................................25
DECK................................................................................................................................................27
SAILS AND RIGGING......................................................................................................................28
FRESH WATER SYSTEM ................................................................................................................38
BILGE PUMP SYSTEM....................................................................................................................40
SEACOCKS AND THRU-HULLS.....................................................................................................42
ELECTRIC SYSTEMS ......................................................................................................................44
XVIII) LP GAS SYSTEM .............................................................................................................................60
EMERGENCY STEERING SYSTEM ...............................................................................................62
ENGINE ............................................................................................................................................63
HANDLING ......................................................................................................................................65
MAINTENANCE ..............................................................................................................................66
XXIII) WINTERIZING PROCEDURES........................................................................................................72
XXIV) SUPPLIER INFORMATION LIST ....................................................................................................76
ENVIRONMENT ..............................................................................................................................78
EXPLANATION OF THE TYPOGRAPHY USED:
DANGER
WARNING
TAKE CARE
BENETEAU 411
03/06/06
11:38
rev 00
OWNER'S MANUAL
BENETEAU 411
Page 1 of 78
Advertisement
Table of Contents
Related Manuals for BENETEAU 411
Summary of Contents for BENETEAU 411
-
Page 1: Table Of Contents
OWNER’S MANUAL BENETEAU 411 HULL IDENTIFICATION NUMBER: US-BEY _ _ _ _ _ _ _ _ _ OWNER’S MANUAL BENETEAU PART #: 111699 SUMMARY: INTRODUCTION..........................3 ANTI-FOULING ..........................4 III) WARRANTY ............................. 5 HULL IDENTIFICATION NUMBERS....................7 DEALER’S RESPONSIBILITIES....................... 7 OWNER’S/OPERATOR’S RESPONSIBILITIES ................ - Page 2 ADDRESS ………………………………………………………………………….. ………………………………………………………………………….. ………………………………………………………………………….. Owner of the BENETEAU 411 number ……………………………………………………………. Do certify that I have accepted delivery and read the information in the owner’s manual delivered with the boat. On ………………………………………… Signature Please keep this copy for your records •••••••••••••••••••••••••••••••••••••••••••••••••••••••••••••••••••••••••••••••••••••••••••••••••••...
-
Page 3: Introduction
Charleston, SC 29401 Marion, SC 29571 Tel ( 843)-805-5000 Tel (843)-423-6459 (843)-805-5010 Fax (843)-423-5516 We would like to sincerely thank you for choosing a Beneteau and we wish you good sailing. BENETEAU 411 Page 3 of 78 03/06/06 11:38 rev 00... -
Page 4: Ii) Anti-Fouling
The primary function of your Beneteau is to maximize your boating pleasure. Your new Beneteau was made to last through weather and time. From the very beginning, great care has been taken in building youR boat. Her molds have been designed and built to resist any deformation of her lines and meticulously maintained to guarantee a superior finish. -
Page 5: Iii) Warranty
BOATS. Beneteau shall in no event be liable to the Owner or any other person or entity for damages of any kind, including but not limited to direct, indirect, special or consequential damages, arising from the sale or in connection with the use or inability to use the boat for any purpose whatsoever, irrespective of whether the claims or actions for such damages are based upon contract, tort, negligence, strict liability, warranty, or otherwise. - Page 6 WARRANTY/REGISTRATION PROCEDURES Warranty Procedure All Beneteau boats carry a one year limited warranty, as well as an extended hull and deck structural warranty (see warranty form for details). As the first owner of your new Beneteau, your warranty only becomes valid upon receipt, by Beneteau, of the completed and signed warranty form.
-
Page 7: Iv) Hull Identification Numbers
Checking of all systems on the boat for fit, proper function and to familiarize • you with the usage of each system. Sea trial of your new Beneteau with you as a final verification that all systems • are in good order. -
Page 8: Vi) Owner's/Operator's Responsibilities
SAFETY AND MAINTENANCE For maximum enjoyment of your Beneteau, due respect should be given to proper safety and maintenance procedures. Be sure that your boat is operated according to the U.S. Coast Guard Regulations as outlined in the "Federal Requirements for Recreational Boats". - Page 9 A large capacity bilge pump. • We recommend that you fully outfit your Beneteau with safety equipment that can be obtained through your dealer or marine supply outlets. These items should include but not be limited to: Up to date nautical charts covering your intended cruising area.
- Page 10 Zinc oxide ointment • • Sunscreen first aid/burn cream Insect/bee sting relief ointment/spray • • Sterile pads Cold packs for sprains • • • Ace bandages & splints • Scissors & tweezers BENETEAU 411 Page 10 of 78 03/06/06 11:38 rev 01...
-
Page 11: Tool Kit
Lubricating supplies: WD-40 and silicone grease. • Engine: Check engine manual for spare parts, engine oil and transmission • fluid recommendations. Sails: Sail repair kit and sail slides. • BENETEAU 411 Page 11 of 78 03/06/06 11:38 rev 01... -
Page 12: Vii) Safe Operation And Warning Labels
Ensure that the boat operator is not under the influence of drugs and/or alcohol. Do not venture out in weather or sea conditions beyond the skill or experience of the operator. There are "Warning" and "Caution" statements affixed to your Beneteau. These are detailed below with location: FUEL WARNING LABEL •... -
Page 13: Propane Labels
PROPANE LABELS • At the propane stove affixed to the bulkhead in the galley Beneteau Part #00001021 Beneteau Part #00001026 BENETEAU 411 Page 13 of 78 03/06/06 11:38 rev 01... - Page 14 • In the propane locker affixed under the propane locker lid Beneteau Part #00001024 • On or next to the LP Gas Line Beneteau Part #00001030 BENETEAU 411 Page 14 of 78 03/06/06 11:38 rev 01...
- Page 15 SWIM LADDER WARNING LABEL • Located on the transom Beneteau Part # 00001022 HIGH VOLTAGE WARNING LABEL • Located beside the 110v electric panel. Beneteau Part #00001034 TRANSOM DOOR WARNING LABEL • Located on or next to the helmsman’s seat. (Not applicable on all models)
- Page 16 STANDARD BATTERY SWITCH LABEL • Located at the standard battery switches. Beneteau Part #00001032 OPTIONAL BATTERY SWITCH LABEL • Located at the optional battery switches Beneteau Part #00001023 SLING LOCATION ARROWS LABEL • Located at or near the hull to deck joint...
-
Page 17: Viii) Federal Regulations
VIII) FEDERAL/STATE REGULATIONS DISCHARGE OF OIL • Located: under the sail locker lid. Beneteau Part #00001007 BENETEAU 411 Page 17 of 78 03/06/06 11:38 rev 01... - Page 18 • Located under the sail locker lid. Beneteau Part #00001025 MARINE SANITATION Your Beneteau is equipped with an USCG approved marine head and holding tank. By law you must use a holding tank in all U.S. waters, Check with local authorities for regional laws governing your area before selecting the overboard discharge option.
-
Page 19: Accident Reporting
"The owner or operator of a vessel is required by law to render assistance to any individual or vessel in distress, so long as his vessel is not endangered in the process." BENETEAU 411 Page 19 of 78 03/06/06 11:38... -
Page 20: Ix) Commissioning
The first commissioning of a yacht is essentially the start of its life, and the importance of proper commissioning procedures at this time cannot be overstated. The first commissioning procedure must be performed by Beneteau dealer personnel or those authorized by them. The dealer will also have a commissioning checklist to be signed by the owner and a dealer representative at the time of the first commissioning. - Page 21 Allow engine to run for at least (1) hour. _____ No leaks at the shaft seal. _____ Shift and throttle operate smoothly with engine running. _____ No leaks at keel bolts after engine run. BENETEAU 411 Page 21 of 78 03/06/06 11:38 rev 01...
- Page 22 Clean cabin sole, deck area and ports. _____ All Coast Guard and safety gear aboard. _____ Sails bent on, ALL HEADSAILS FIT FURLING. _____ All electronics and optional gear tested and working. BENETEAU 411 Page 22 of 78 03/06/06 11:38 rev 01...
-
Page 23: X) Specifications Of The Boat
SPECIFICATIONS OF THE BOAT Type ............. BENETEAU 411 Name of Builder ........BENETEAU USA INC. Design Category ........No. of acknowledged body....CE 0607 Hull Length : 12.34 m (40.49 ft) Hull Beam 3.94 m (12.93 ft) Draft: Shallow : 1.45 m... - Page 24 2200 (4,856) 2200 (4,856) 2200 (4,856) 2200 (4,856) Kg (Lbs.) MAXIMUM LOAD = MAXIMUM LOAD DISPLACEMENT – LIGHT BOAT ANY OVERLOADING CARRIES A RISK OF FLOODING OR LOSS OF STABILITY BENETEAU 411 Page 24 of 78 03/06/06 11:38 rev 01...
-
Page 25: Xi) Interior Layout
INTERIOR LAYOUT 2 CABIN VERSION 3 CABIN VERSION BENETEAU 411 Page 25 of 78 03/06/06 11:38 rev 01... - Page 26 EXIT IN CASE OF FIRE BENETEAU 411 Page 26 of 78 03/06/06 11:38 rev 01...
-
Page 27: Xii) Deck
- Jack lines can be fastened either to the mooring cleats or to the toe rail. The Beneteau 411 is fitted with a foldaway swimming ladder. The swimming ladder should be in its folded/upright position as soon as you are on board. -
Page 28: Xiii) Sails And Rigging
Dia. mm Dia. In. V1 (Shroud) D1 AFT (Aft Lower Shroud ) V2D3 (Upper Shroud) 5/16 D2 (Inter) 9/32 Forestay 5/16 D1 FWD (Fwd Lower Shroud ) Double Preventer Backstay 9/32 BENETEAU 411 Page 28 of 78 03/06/06 11:38 rev 01... - Page 29 FORESTAY AND BADB BACKSTAY KIT PRO.BASIC ENETEAU INC P.O. Drawer 1218 Marion, SC 29571 Part No. 08020161 (803) 423-4201 THIS DOCUMENT IS PROPRIETARY - REPRODUCTION MUST BE AUTHORIZED BY BENETEAU BENETEAU 411 Page 29 of 78 03/06/06 11:38 rev 01...
- Page 30 P.O. Drawer 1218 Marion, SC 29571 Pa rt No. 080201 (803) 423-4201 TH IS DOC UMENT I S PROPR IETARY - REPR ODUCTIO N MUST BE AUT HORIZED BY BE NETEAU BENETEAU 411 Page 30 of 78 03/06/06 11:38 rev 01...
- Page 31 0804 Threaded Stemball ENETEAU INC 08048501 Threaded Stemball P.O. Drawer 1218 Marion, SC 29571 Part No. 080201 (803) 423-4201 THIS DOCUMENT IS PROPRIETARY - REPRODUCTION MUST BE AUTHORIZED BY BENETEAU BENETEAU 411 Page 31 of 78 03/06/06 11:38 rev 01...
- Page 32 Mainsail Specification and Technical Worksheet Model Type: Beneteau 411 U.S.A. Sail Type: Roller Furling Mainsail SERIES 2000 “P” Dim: 12660 “E” Dim: 4520 Rake: Area: 27.97sqmt Finished Dimensions Luff: 12530 Leech: 12896 Foot: 4520 Finish Details 8.08 CHALLENGE Single ply 25mm webbing loop...
- Page 33 Mainsail Specification and Technical Worksheet Model Type: Oceanis 411 U.S.A. Sail Type: Classic Mainsail Series 2000 “P” Dim: 12660 “E” Dim: 4520 Area: 32.5sqmt Finished Dimensions Luff: 12621 Leech: 13225 Foot: 4501 Luff Reef Finish Details 3259-w/1246 Material Type: 9.08 Challenge Dacron...
- Page 34 Headsail Specification and Technical Worksheet Model Type: Beneteau 411 U.S.A. Sail Type: Roller Furling Genoa SERIES 200 “I” Dim: 14550 “J” Dim: 4970 Max Hoist: 14470 Area: 53.58sqmt Rake: Finished Dimensions Luff: 14400 Leech: 14077 Foot: 7787 L.P.: 7452 150%...
- Page 35 Main Halyard on portside of the mast, thru a spinlock, stowed on a general-purpose cleat. NOTE: SHOWN AS STANDARD MAST LINES THROUGH DECK ORGANIZER Upper Sheave Lower Sheave 2 3 4 5 6 7 8 BENETEAU 411 Page 35 of 78 03/06/06 11:38 rev 01...
- Page 36 Genoa Halyard on portside of the mast, thru a spinlock, stowed on a general-purpose cleat. Main Sail Outhaul is cleated on the boom NOTE: SHOWN AS STANDARD MAST LINES THROUGH DECK ORGANIZER Upper Sheave Lower Sheave 2 3 4 5 6 7 8 BENETEAU 411 Page 36 of 78 03/06/06 11:38 rev 01...
- Page 37 MAINSAIL TACKLE AND REEFING SYSTEM MAINSAIL TACKLE REEFING LINE CIRCUIT Reef n°1 (starboard side) Reef n°2 (starboard side) BENETEAU 411 Page 37 of 78 03/06/06 11:38 rev 01...
-
Page 38: Xiv) Fresh Water System
When the system has not been used for a long period of time, the tanks and pipes should be cleansed with an acetic acid solution (white vinegar). The water drains out from the sink and wash basins through their own thru-hulls. Close them when the water system is not used. BENETEAU 411 Page 38 of 78 03/06/06 11:38... - Page 39 LAY OUT OF THE FRESH WATER SYSTEM 2 CABIN VERSION 3 CABIN VERSION Under Starboard Settee BENETEAU 411 Page 39 of 78 03/06/06 11:38 rev 01...
-
Page 40: Xv) Bilge Pump System
(See the lay out drawing of the system - next page) Make sure that the bilge pump intake strainer is not blocked with dirt. Regularly clean the intake strainer on the sump and the filter of the system. BENETEAU 411 Page 40 of 78 03/06/06... - Page 41 LAY OUT OF THE BILGE PUMP SYSTEM 2 CABIN VERSION 3 CABIN VERSION Under Starboard Settee BENETEAU 411 Page 41 of 78 03/06/06 11:38 rev 01...
-
Page 42: Xvi) Seacocks And Thru-Hulls
Washbasin Discharge Shower Discharge Sink Discharge Engine Cooling Water Intake Stern Tube Cooling Intake Valve Speed/Log, Depth Sounder Thruhulls Operation of three-way valve for toilets DISCHARGE DISCHARGE CLOSED CLOSED INTAKE BENETEAU 411 Page 42 of 78 03/06/06 11:38 rev 01... - Page 43 SEACOCK AND THRU-HULL LAY OUT 2 CABIN VERSION 3 CABIN VERSION 3 & 4 3 & 4 3 & 4 3 & 4 BENETEAU 411 Page 43 of 78 03/06/06 11:38 rev 01...
-
Page 44: Xvii) Electric Systems
Turn off the shore supply switch on board before you plug in or unplug the boat / shore supply cable. Do not tamper with the connections of the Boat / shore supply cable. Use only compatible connections. BENETEAU 411 Page 44 of 78... - Page 45 Outlets Cabin Lights Salon Lights 12V DC Outlet Bilge Pump Water Pump Refrigeration Gas Valve Shower Pump Instruments Spare qty 2 Spare qty 6 Spare qty 2 Spare qty 1 BENETEAU 411 Page 45 of 78 03/06/06 11:38 rev 01...
- Page 46 Instrument Lights Fresh Water Pump Fresh Water Pump Bilge Pump Bilge Pump Refrigeration Refrigeration Shower Pump – Fwd Toilet Shower Pump Shower Pump – Aft Toilet Shower Pump = Light Switch BENETEAU 411 Page 46 of 78 03/06/06 11:38 rev 01...
- Page 47 12V LIGHT AND APPLIANCE LAY OUT 2 CABIN VERSION 3 CABIN VERSION 5, 6, 7 BENETEAU 411 Page 47 of 78 03/06/06 11:38 rev 01...
- Page 48 LOCATION OF 110 / 220V SOCKETS AND APPLIANCES DESCRIPTION Shore Power Inlet Battery Charger 110/220V Outlet Water Heater 2 CABIN VERSION 3 CABIN VERSION BENETEAU 411 Page 48 of 78 03/06/06 11:38 rev 01...
- Page 49 O411 2C/2T - HULL m a n u e l l e m e n t . OC411 C6 DWG: HULL2C-2T page 3/4 N° : 041960 MODIFICATIONS DATES BENETEAU 411 Page 49 of 78 03/06/06 11:38 rev 01...
- Page 50 . O411 2C/2T - HULL OC411 C6 DWG: HULL2C-2T page 4/4 N° : 041960 MODIFICATIONS DATES BENETEAU 411 Page 50 of 78 03/06/06 11:38 rev 01...
- Page 51 TOL GEN : DATE : 8/27/97 BY: P. LG HULL HARNESS LAY-OUT ne pas modifier m a n u e l l e m e n t . O411- 2C/2T OC 411 DWG : LAYOUTHULL2C-2T N° : 041960 MODIFICATIONS DATES BENETEAU 411...
- Page 52 O411 3C / 2T HULL m a n u e l l e m e n t . OC411 F6-K6 DWG : HULL3C-2T page 3/4 N° : 041962 MODIFICATIONS DATES BENETEAU 411 Page 52 of 78 03/06/06 11:38 rev 01...
- Page 53 O411 3C / 2T HULL m a n u e l l e m e n t . DWG : HULL3C-2T page 4/4 N° : 041962 MODIFICATIONS DATES BENETEAU 411 Page 53 of 78 03/06/06 11:38 rev 01...
- Page 54 TOL GEN : BY: P . LG HULL HARNESS LAY-OUT ne pas modifier O411 - 3C/2T m a n u e l l e m e n t . OC 411 DWG : LAYOUTHU3C-2T MODIFICATIONS DATES BENETEAU 411 Page 54 of 78...
- Page 55 O411 2C / 2T - DECK OC411 C6 ne pas modifier m a n u e l le m e n t . DEST: DWG: DECK2C-2T Page 2/2 N° : 041961 MODIFICATIONS DATES BENETEAU 411 Page 55 of 78 03/06/06 11:38 rev 01...
- Page 56 TOL GEN : BY : P.LG DECK HARNESS LAY-OUT ne pas modifier DECK LINER O411-2C/2T m a n u e l l e m e n t . OC 411 version C6 DWG :LAYOUTDECKLINER MODIFICATIONS DATES BENETEAU 411 Page 56 of 78...
- Page 57 OC411 F6-K6 ne pas modifier O411 3C / 2T m a n u e l l e m e n t . DWG:HARNDECK3C2T Page 1/2 041965 N° : MODIFICATIONS DATES BENETEAU 411 Page 57 of 78 03/06/06 11:38 rev 01...
- Page 58 DECK HARNESS LAY-OUT OC411 F6-K6 ne pas modifier O411 3C / 2T m a n u e l l e m e n t . DWG:LAYOUTDECK3C2T N° : 041965 MODIFICATIONS DATES BENETEAU 411 Page 58 of 78 03/06/06 11:38 rev 01...
- Page 59 Conduit from Panel to Mast Conduit From Panel to Depth Transducer Conduit from Windlass to Relay Box Passage in the deck liner Passage in the hull liner 2 CABIN VERSION 3 CABIN VERSION BENETEAU 411 Page 59 of 78 03/06/06 11:38 rev 01...
-
Page 60: Xviii) Lp Gas System
Do not use ammonia-based products to clean any part of the system or to discover a leak. The LP gas system should be checked for leaks on a regular basis. See the manual provided with the stove for instructions. BENETEAU 411 Page 60 of 78 03/06/06... - Page 61 LAY OUT OF THE GAS SYSTEM DESCRIPTION Gas Locker Valve and Regulator Gas Locker Ventilation 2 CABIN VERSION 3 CABIN VERSION Handle for Manual Bilge Pump Valve on Bottle 12V Solenoid / Regulator Pressure Gauge BENETEAU 411 Page 61 of 78 03/06/06 11:38 rev 01...
-
Page 62: Xix) Emergency Steering System
DESCRIPTION Emergency Tiller Cap to Get to the Rudder Stock Rudder Stock Steering Cable Quadrant Rudder Retaining Ring Rudder Idler Steering Chain Steerer Unit Wheel BENETEAU 411 Page 62 of 78 03/06/06 11:38 rev 01... -
Page 63: Xx) Engine
Engine Control Handle in the Cockpit Engine Stop Control Shaft Seal Fuel Shutoff Control Propeller Shaft Fuel – Deck Fill Fuel Tank Stern Tube Valve Stern Tube House Battery Bat 2 Bat 1 BENETEAU 411 Page 63 of 78 03/06/06 11:38 rev 01... - Page 64 ENGINE LAY OUT BENETEAU 411 Page 64 of 78 03/06/06 11:38 rev 01...
-
Page 65: Xxi) Handling
XXI) HANDLING Contact your BENETEAU dealer for maintenance and repair of your boat. The dealer will advise properly, or will supply you with the spare parts you need or the materials that are suited to your boat. Have your boat hauled & serviced once a year. -
Page 66: Xxii) Maintenance
After a few years, the gel coat may be re-polished, either with a lambs wool buffer and polish, or by hand using a polish or similar product. Your yard will also be able to supply you with special cleaning products for getting rid of stubborn stains. BENETEAU 411 Page 66 of 78 03/06/06... - Page 67 MINOR GEL COAT REPAIRS To fill in a scratch or small dent, order a Beneteau Gel coat Repair Kit with instructions for use, from your dealer or obtain a small quantity of gel coat and catalyst. Clean the affected area and rub it down with wet-and-dry sandpaper, then dry it off thoroughly (use a hair-dryer if necessary).
- Page 68 Should the woodwork become damaged, gently rub it down with very fine sandpaper and touch it with several coats of the varnish. Your dealer will be able to order Beneteau varnish. When this is dry, rub it down with a very fine wet-and-dry sandpaper (grade 800 or 1000) and finish off with polish (or a silicone spray) or wax.
- Page 69 Maintenance consists of regularly pumping the system out with fresh water and leaving the holding tank empty whenever possible. Check the thru-hulls, seacocks, connectors and hose clamps regularly. Make sure the seacocks turn freely. BENETEAU 411 Page 69 of 78 03/06/06 11:38...
- Page 70 Water temperature, salinity, the presence of neighboring boats, the nature of the bottom and the materials in the dock will all affect the life of your boat's anodes. Order your spare anodes thru your dealer or from Beneteau Customer Service. CALIFORNIA...
- Page 71 (preferably on a lawn) to dry. Never dry a sail by hoisting it and letting it flog in the wind; this will very quickly cause the sail to deteriorate. Never fold and store a damp sail. BENETEAU 411 Page 71 of 78 03/06/06...
-
Page 72: Xxiii) Winterizing Procedures
The following sections are oriented towards hauling your boat for winter storage in a cold climate, but they are also a good guideline as a lay-up procedure for your Beneteau in any climate. - Page 73 If possible, allow this to sit in the tank overnight, then completely pump out and drain the entire system. If antifreeze is used in the system, check in the manufacturer's literature for the recommended type. BENETEAU 411 Page 73 of 78 03/06/06...
- Page 74 Completely pump out bilge of any water and clean out any debris present. Bilge pumps should be pumped dry and hoses disconnected, to ensure that no water is left in the system. BENETEAU 411 Page 74 of 78 03/06/06 11:38...
- Page 75 CAUTION! DO NOT USE BLACK POLYETHYLENE AND DO NOT SHRINK-WRAP THE BOAT BY TAPING TO THE HULL. ALWAYS ASSURE GOOD VENTILATION. SAILS Remove the sails, clean following the sail makers recommendations and store in a clean dry space. BENETEAU 411 Page 75 of 78 03/06/06 11:38 rev 01...
-
Page 76: Xxiv) Supplier Information List
XXIV) SUPPLIER INFORMATION LIST The following page lists our key suppliers in the United States. If you need information from a supplier not listed you may contact Beneteau’s Customer Service Department in Marion, South Carolina at 1-843- 423-4201. BENETEAU 411... - Page 77 (813) 445-9647 (813) 446-8800 www.maxone@aol.com Westerbeke Westerbeke Engines Avon Industrial Park Avon 02322 (508) 588-7700 (508) 559-9323 www.westerbeke.com Yanmar Yanmar Engine 2365 Route 22 Union 07083- (908) 964-0700 (908) 964-5032 engcity@eclipe.net BENETEAU 411 Page 77 of 78 11:38 rev 01...
-
Page 78: Xxv) Environment
Do not throw plastic bags overboard. You love the sea, just as we do; therefore, help us to protect it and do not pollute it. BENETEAU 411 Page 78 of 78 03/06/06 11:38...
Need help?
Do you have a question about the 411 and is the answer not in the manual?
Questions and answers