BENETEAU 331 Owner's Manual

Table of Contents

Quick Links

HULL IDENTIFICATION NUMBER:

US-BEY _ _ _ _ _ _ _ _ _

OWNER'S MANUAL BENETEAU PART #: 111570

SUMMARY:

INTRODUCTION .....................................................................................................................................3

II)

ANTI-FOULING .......................................................................................................................................4

III)

WARRANTY ............................................................................................................................................5

IV)

HULL IDENTIFICATION NUMBERS....................................................................................................7

DEALER'S RESPONSIBILITIES ............................................................................................................7

VI)

OWNER'S/OPERATOR'S RESPONSIBILITIES....................................................................................8

VII)

SAFE OPERATION AND WARNING LABELS ..................................................................................12

VIII)

FEDERAL REGULATIONS...................................................................................................................17

IX)

COMMISSIONING.................................................................................................................................20

SPECIFICATIONS OF THE BOAT .......................................................................................................23

XI)

INTERIOR LAYOUT .............................................................................................................................25

XII)

DECK ......................................................................................................................................................27

XIII)

SAILS AND RIGGING...........................................................................................................................28

XIV)

FRESH WATER SYSTEM .....................................................................................................................38

XV)

BILGE PUMP SYSTEM .........................................................................................................................40

XVI)

SEACOCKS AND THRU-HULLS .........................................................................................................42

XVII)

ELECTRIC SYSTEMS ...........................................................................................................................44

XVIII) LP GAS SYSTEM ...................................................................................................................................54

XIX)

EMERGENCY STEERING SYSTEM....................................................................................................56

XX)

ENGINE ..................................................................................................................................................57

XXI)

HANDLING ............................................................................................................................................59

XXII)

MAINTENANCE ....................................................................................................................................60

XXIII) WINTERIZING PROCEDURES ............................................................................................................66

XXIV) SUPPLIER INFORMATION LIST.........................................................................................................70

XXV)

ENVIRONMENT ....................................................................................................................................72

XXVI) CENTERBOARD SYSTEM ...................................................................................................................73

EXPLANATION OF THE TYPOGRAPHY USED:

DANGER

WARNING

TAKE CARE

BENETEAU 331

Jan. 10, 2003

rev 02

OWNER'S MANUAL

BENETEAU 331

Page 1 of 73

Table of Contents

Need help?

Do you have a question about the 331 and is the answer not in the manual?

Questions and answers

Haldun Hamurculu

June 21, 2025

I can’t find hull identification number.is it possible to be 149750.if it is not how can i find

Summary of Contents for BENETEAU 331

Page 1: Table Of Contents
OWNER’S MANUAL BENETEAU 331 HULL IDENTIFICATION NUMBER: US-BEY _ _ _ _ _ _ _ _ _ OWNER’S MANUAL BENETEAU PART #: 111570 SUMMARY: INTRODUCTION .............................3 ANTI-FOULING ............................4 III) WARRANTY ............................5 HULL IDENTIFICATION NUMBERS....................7 DEALER’S RESPONSIBILITIES ......................7 OWNER’S/OPERATOR’S RESPONSIBILITIES..................8 VII) SAFE OPERATION AND WARNING LABELS ..................12...
Page 2 ADDRESS ………………………………………………………………………….. ………………………………………………………………………….. ………………………………………………………………………….. Owner of the BENETEAU 331 number ……………………………………………………………. Do certify that I have accepted delivery and read the information in the owner’s manual delivered with the boat. On ………………………………………… Signature Please keep this copy for your records •••••••••••••••••••••••••••••••••••••••••••••••••••••••••••••••••••••••••••••••••••••••••••••••••••...
Page 3: Introduction
Charleston, SC 29401 Marion, SC 29571 Tel ( 843)-805-5000 Tel (843)-423-6459 (843)-805-5010 Fax (843)-423-5516 We would like to sincerely thank you for choosing a Beneteau and we wish you good sailing. BENETEAU 331 Page 3 of 73 Jan. 10, 2003 rev 02...
Page 4: Ii) Anti-Fouling
The primary function of your Beneteau is to maximize your boating pleasure. Your new Beneteau was made to last through weather and time. From the very beginning, great care has been taken in building your boat. Her molds have been designed and built to resist any deformation of her lines and meticulously maintained to guarantee a superior finish.
Page 5: Iii) Warranty
BOATS. Beneteau shall in no event be liable to the Owner or any other person or entity for damages of any kind, including but not limited to direct, indirect, special or consequential damages, arising from the sale or in connection with the use or inability to use the boat for any purpose whatsoever, irrespective of whether the claims or actions for such damages are based upon contract, tort, negligence, strict liability, warranty, or otherwise.
Page 6 WARRANTY/REGISTRATION PROCEDURES Warranty Procedure All Beneteau boats carry a one year limited warranty, as well as an extended hull and deck structural warranty (see warranty form for details). As the first owner of your new Beneteau, your warranty only becomes valid upon receipt, by Beneteau, of the completed and signed warranty form.
Page 7: Iv) Hull Identification Numbers
Checking of all systems on the boat for fit, proper function and to familiarize • you with the usage of each system. Sea trial of your new Beneteau with you as a final verification that all systems • are in good order.
Page 8: Vi) Owner's/Operator's Responsibilities
SAFETY AND MAINTENANCE For maximum enjoyment of your Beneteau, due respect should be given to proper safety and maintenance procedures. Be sure that your boat is operated according to the U.S. Coast Guard Regulations as outlined in the "Federal Requirements for Recreational Boats".
Page 9 A large capacity bilge pump. • We recommend that you fully outfit your Beneteau with safety equipment that can be obtained through your dealer or marine supply outlets. These items should include but not be limited to: Up to date nautical charts covering your intended cruising area.
Page 10 • • Sunscreen first aid/burn cream Insect/bee sting relief ointment/spray • • Sterile pads Cold packs for sprains • • Ace bandages & splints Scissors & tweezers • • BENETEAU 331 Page 10 of 73 Jan. 10, 2003 rev 02...
Page 11: Tool Kit
Lubricating supplies: WD-40 and silicone grease. • Engine: Check engine manual for spare parts, engine oil and transmission • fluid recommendations. Sails: Sail repair kit and sail slides. • BENETEAU 331 Page 11 of 73 Jan. 10, 2003 rev 02...
Page 12: Vii) Safe Operation And Warning Labels
Ensure that the boat operator is not under the influence of drugs and/or alcohol. Do not venture out in weather or sea conditions beyond the skill or experience of the operator. There are "Warning" and "Caution" statements affixed to your Beneteau. These are detailed below with location: FUEL WARNING LABEL •...
Page 13: Propane Labels
PROPANE LABELS • At the propane stove affixed to the bulkhead in the galley Beneteau Part #00001021 Beneteau Part #00001026 BENETEAU 331 Page 13 of 73 Jan. 10, 2003 rev 02...
Page 14 • In the propane locker affixed under the propane locker lid Beneteau Part #00001024 • On or next to the LP Gas Line Beneteau Part #00001030 BENETEAU 331 Page 14 of 73 Jan. 10, 2003 rev 02...
Page 15 SWIM LADDER WARNING LABEL • Located on the transom Beneteau Part # 00001022 HIGH VOLTAGE WARNING LABEL • Located beside the 110v electric panel. Beneteau Part #00001034 TRANSOM DOOR WARNING LABEL • Located on or next to the helmsman’s seat. (Not applicable on all models)
Page 16 STANDARD BATTERY SWITCH LABEL • Located at the standard battery switches. Beneteau Part #00001032 OPTIONAL BATTERY SWITCH LABEL • Located at the optional battery switches Beneteau Part #00001023 LIFTING SLING LOCATION ARROWS LABEL • Located at or near the hull to deck joint...
Page 17: Viii) Federal Regulations
VIII) FEDERAL/STATE REGULATIONS DISCHARGE OF OIL • Located: under the sail locker lid. Beneteau Part #00001007 BENETEAU 331 Page 17 of 73 Jan. 10, 2003 rev 02...
Page 18 • Located under the sail locker lid. Beneteau Part #00001025 MARINE SANITATION Your Beneteau is equipped with an USCG approved marine head and holding tank. By law you must use a holding tank in all U.S. waters, Check with local authorities for regional laws governing your area before selecting the overboard discharge option.
Page 19: Accident Reporting
"The owner or operator of a vessel is required by law to render assistance to any individual or vessel in distress, so long as his vessel is not endangered in the process." BENETEAU 331 Page 19 of 73 Jan. 10, 2003...
Page 20: Ix) Commissioning
The first commissioning of a yacht is essentially the start of its life, and the importance of proper commissioning procedures at this time cannot be overstated. The first commissioning procedure must be performed by Beneteau dealer personnel or those authorized by them. The dealer will also have a commissioning checklist to be signed by the owner and a dealer representative at the time of the first commissioning.
Page 21 Allow engine to run for at least (1) hour. _____ No leaks at the shaft seal. _____ Shift and throttle operate smoothly with engine running. _____ No leaks at keel bolts after engine run. BENETEAU 331 Page 21 of 73 Jan. 10, 2003 rev 02...
Page 22 Clean cabin sole, deck area and ports. _____ All Coast Guard and safety gear aboard. _____ Sails bent on, ALL HEADSAILS FIT FURLING. _____ All electronics and optional gear tested and working. BENETEAU 331 Page 22 of 73 Jan. 10, 2003 rev 02...
Page 23: X) Specifications Of The Boat
SPECIFICATIONS OF THE BOAT Type ............BENETEAU 331 Name of Builder ........BENETEAU USA INC. Design Category........No. of acknowledged body..... CE 0607 Hull Length : 10.00 m (32.81 ft) Hull Beam 3.42 m (11.22 ft) Draft: Shoal Keel : 1.31 m...
Page 24 170 (375) 170 (375) 170 (375) 170 (375) Fuel : 56 (123) 56 (123) 56 (123) 56 (123) Personal Equipment: 150 (331) 200 (441) 200 (441) 250 (551) Optional Equipment Additional Water Tank: 140 (309) 140 (309) 140 (309) 140 (309)
Page 25: Xi) Interior Layout
INTERIOR LAYOUT 2 CABIN VERSION 3 CABIN VERSION BENETEAU 331 Page 25 of 73 Jan. 10, 2003 rev 02...
Page 26 EXIT IN CASE OF FIRE SP EED KN O T S LO G DEP TH M ETR ES S H I P M A TE 135Ø KG BENETEAU 331 Page 26 of 73 Jan. 10, 2003 rev 02...
Page 27: Xii) Deck
- Jack lines can be fastened either to the mooring cleats or to the toe rail. The Beneteau 331 is fitted with a foldaway swimming ladder. The swimming ladder should be in its folded/upright position as soon as you are on board.
Page 28: Xiii) Sails And Rigging
Specifications of the Standing Rigging: V: VERTICAL - D: DIAGONAL CABLE Dia. mm Dia. In. V1D2 (Cap Shroud) 9/32 D1 AFT (Aft Lower Shroud ) 5/16 Forestay 9/32 Babystay 7/32 Double Backstay 3/16 BENETEAU 331 Page 28 of 73 Jan. 10, 2003 rev 02...
Page 29: Standing Rigging
ENETEAU USA P.O. Drawer 1218 JAW AND JAW TOGGLE Marion, SC 29571 Part No. J2001616 080201 (803) 423-4201 THIS DOCUMENT IS PROPRIETARY - REPRODUCTION MUST BE AUTHORIZED BY BENETEAU BENETEAU 331 Page 29 of 73 Jan. 10, 2003 rev 02...
Page 30 Headsail Specification and Technical Worksheet Model Type: Beneteau 331 U.S.A. Sail Type: Roller Furling Genoa Series 2000 “I” Dim: 12500 “J” Dim: 3760 Max Hoist: 12209 Area: 31.3sqmt Rake: Finished Dimensions Luff: 12080 Leech: 11555 Foot: 5499 L.P.: 5264 @140%...
Page 31 Mainsail Specification and Technical Worksheet Model Type: Beneteau 331 U.S.A. Sail Type: Roller Furling Mainsail Series 2000 “P” Dim: 10400 “E” Dim: 4280 Area: 20.92sqmt Rake: Finished Dimensions Luff: 10296 Leech: 10761 Foot: 4250 Finish Details Material Type: Tack Detail: 7.08 Challenge...
Page 32 Mainsail Specification and Technical Worksheet Model Type: Oceanis 331 U.S.A. Sail Type: Classic Mainsail Series 2000 “P” Dim: “E” Dim: Rake: Area: 10540 4350 25.1 sqmt Finished Dimensions Luff: 10390 Leech: 11130 Foot: 4330 Finish Details Material Type: 7.3 Challenge Dacron...
Page 33 Phone: 203-874-6984 Fax: 203-877-7014 Loop goes through corner rings and Drawing Name: Beneteau 331 Lazy Bag back to other side of bag to allow for tensioning. Buckle should be set 200mm in from ends of bag Scale: Not to Scale...
Page 34 TECHNICAL SPECIFICATION SHEET Beneteau 331 lazy jack lines Material List for BOTH SIDES 4- 30mm rings 44mts of 6mm line Lines will be tied around round batten 10000mm stock that is exposed in cutouts 6500mm 5500mm Neil Pryde Sales & Design Office 50 Broad Street, Milford Conn.
Page 35 Genoa Halyard on starboard side of the mast, made off with clamcleat, stowed on a general-purpose cleat. Main Boom Topping Lift on a general-purpose cleat. Vang cleated on solid vang BENETEAU 331 Page 35 of 73 Jan. 10, 2003 rev 02...
Page 36 Genoa Halyard on starboard side of the mast, made off with clamcleat, stowed on a general-purpose cleat. Main Boom Topping Lift on a general-purpose cleat. Vang cleated on solid vang Outhaul cleated on boom BENETEAU 331 Page 36 of 73 Jan. 10, 2003 rev 02...
Page 37 MAINSAIL TACKLE AND REEFING SYSTEM MAINSAIL TACKLE REEFING LINE CIRCUIT Reef n°1 Reef n°2 BENETEAU 331 Page 37 of 73 Jan. 10, 2003 rev 02...
Page 38: Xiv) Fresh Water System
When the system has not been used for a long period of time, the tanks and pipes should be cleansed with an acetic acid solution (white vinegar). The water drains out from the sink and wash basins through their own thru-hulls. Close them when the water system is not used. BENETEAU 331 Page 38 of 73 Jan. 10, 2003 rev 02...
Page 39 LAY OUT OF THE FRESH WATER SYSTEM Under Sink in Head BENETEAU 331 Page 39 of 73 Jan. 10, 2003 rev 02...
Page 40: Xv) Bilge Pump System
(See the lay out drawing of the system - next page) Make sure that the bilge pump intake strainer is not blocked with dirt. Regularly clean the intake strainer on the sump and the filter of the system. BENETEAU 331 Page 40 of 73 Jan. 10, 2003...
Page 41: Lay Out Of Bilge Pump System
LAY OUT OF THE BILGE PUMP SYSTEM Under Sink in Head From shower drain Out to thru hull From icebox drain BENETEAU 331 Page 41 of 73 Jan. 10, 2003 rev 02...
Page 42: Xvi) Seacocks And Thru-Hulls
Washbasin Discharge Shower/Icebox Discharge Sink Discharge Stern Tube Cooling Intake Valve Engine Cooling Water Intake Speed/Log, Depth Sounder Thruhulls Operation of three-way valve for toilets DISCHARGE DISCHARGE CLOSED CLOSED INTAKE BENETEAU 331 Page 42 of 73 Jan. 10, 2003 rev 02...
Page 43 SEACOCK AND THRU-HULL LAY OUT BENETEAU 331 Page 43 of 73 Jan. 10, 2003 rev 02...
Page 44: Xvii) Electric Systems
Turn off the shore supply switch on board before you plug in or unplug the boat / shore supply cable. Do not tamper with the connections of the Boat / shore supply cable. Use only compatible connections. BENETEAU 331 Page 44 of 73 Jan.
Page 45 Navigation Light Anchor Light Water Heater Steaming Light Battery Charger Deck Light Outlets Cabin Lights Fresh Water Pump Bilge Pump Refrigeration Gas Valve Shower Pump Instruments Spare qty 3 BENETEAU 331 Page 45 of 73 Jan. 10, 2003 rev 02...
Page 46 Cabin Lights Reading Light Cabin Lights Cockpit Lights Instrument Lights Compass Light Instrument Lights Fresh Water Pump Fresh Water Pump Bilge Pump Bilge Pump Refrigeration Refrigeration Shower Pump Shower Pump BENETEAU 331 Page 46 of 73 Jan. 10, 2003 rev 02...
Page 47 12V LIGHT AND APPLIANCE LAY OUT = CEILING LIGHT WITH SWITCH = CEILING LIGHT WITHOUT SWITCH = READING LIGHT = SWITCH BENETEAU 331 Page 47 of 73 Jan. 10, 2003 rev 02...
Page 48: Location Of 110/220V Sockets And Appliances
LOCATION OF 110 / 220V SOCKETS AND APPLIANCES DESCRIPTION Shore Power Inlet Battery Charger 110/220V Outlet Water Heater BENETEAU 331 Page 48 of 73 Jan. 10, 2003 rev 02...
Page 49 Shorten harness by 1.5m 11/4/99 Marion, SC 29571 (803) 423-4201 THIS DOCUMENT IS - PROPRIETARY AND REPRODUCTIONS MUST BE AUTHORIZED BY BENETEAU DRAWN BY BENETEAU - SPECIFIED AND DESIGNED BY PRODUCT MANUFACTURER. BENETEAU 331 Page 49 of 73 Jan. 10, 2003...
Page 50 P.O. Drawer 1218 FF01 Marion, SC 29571 (803) 423-4201 THIS DOCUMENT IS - PROPRIETARY AND REPRODUCTIONS MUST BE AUTHORIZED BY BENETEAU DRAWN BY BENETEAU - SPECIFIED AND DESIGNED BY PRODUCT MANUFACTURER. BENETEAU 331 Page 50 of 73 Jan. 10, 2003...
Page 51 P.O. Drawer 1218 050885 Marion, SC 29571 (803) 423-4201 THIS DOCUMENT IS - PROPRIETARY AND REPRODUCTIONS MUST BE AUTHORIZED BY BENETEAU DRAWN BY BENETEAU - SPECIFIED AND DESIGNED BY PRODUCT MANUFACTURER. BENETEAU 331 Page 51 of 73 Jan. 10, 2003...
Page 52 P.O. Drawer 1218 FF01 Marion, SC 29571 (803) 423-4201 THIS DOCUMENT IS - PROPRIETARY AND REPRODUCTIONS MUST BE AUTHORIZED BY BENETEAU DRAWN BY BENETEAU - SPECIFIED AND DESIGNED BY PRODUCT MANUFACTURER. BENETEAU 331 Page 52 of 73 Jan. 10, 2003...
Page 53 Conduit 12V Panel to Transom Conduit from Panel to Mast Conduit From Panel to Fwd Cabin Conduit from Pump House to Galley Passage in the hull liner Passage in the deck liner BENETEAU 331 Page 53 of 73 Jan. 10, 2003 rev 02...
Page 54: Xviii) Lp Gas System
Do not use ammonia-based products to clean any part of the system or to discover a leak. The LP gas system should be checked for leaks on a regular basis. See the manual provided with the stove for instructions. BENETEAU 331 Page 54 of 73 Jan. 10, 2003...
Page 55 LAY OUT OF THE GAS SYSTEM DESCRIPTION Gas Locker Valve and Regulator Gas Locker Ventilation Pressure Gauge Valve on Bottle 12V Solenoid / Regulator BENETEAU 331 Page 55 of 73 Jan. 10, 2003 rev 02...
Page 56: Xix) Emergency Steering System
Emergency Tiller Cap to Get to the Rudder Stock Rudder Stock Steering Cable Quadrant Rudder Shaft Bearing Split Sleeve – up to hull #30 Washer – up to hull #30 BENETEAU 331 Page 56 of 73 Jan. 10, 2003 rev 02...
Page 57: Xx) Engine
Engine Control Handle in the Cockpit Engine Stop Control Shaft Seal Fuel Shutoff Control Propeller Shaft Fuel – Deck Fill Fuel Tank Stern Tube Valve Stern Tube Engine Battery BENETEAU 331 Page 57 of 73 Jan. 10, 2003 rev 02...
Page 58 ENGINE LAY OUT BENETEAU 331 Page 58 of 73 Jan. 10, 2003 rev 02...
Page 59: Xxi) Handling
XXI) HANDLING Contact your BENETEAU dealer for maintenance and repair of your boat. The dealer will advise properly, or will supply you with the spare parts you need or the materials that are suited to your boat. Have your boat hauled & serviced once a year.
Page 60: Xxii) Maintenance
After a few years, the gel coat may be re-polished, either with a lambs wool buffer and polish, or by hand using a polish or similar product. Your yard will also be able to supply you with special cleaning products for getting rid of stubborn stains. BENETEAU 331 Page 60 of 73 Jan. 10, 2003...
Page 61 MINOR GEL COAT REPAIRS To fill in a scratch or small nick, order a Beneteau Gel coat Repair Kit with instructions for use, from your dealer or obtain a small quantity of gel coat and catalyst. Clean the affected area and rub it down with wet-and-dry sandpaper, then dry it off thoroughly (use a hair-dryer if necessary).
Page 62 Should the woodwork become damaged, gently rub it down with very fine sandpaper and touch it with several coats of the varnish. Your dealer will be able to order Beneteau varnish. When this is dry, rub it down with a very fine wet-and-dry sandpaper (grade 800 or 1000) and finish off with polish (or a silicone spray) or wax.
Page 63 Maintenance consists of regularly pumping the system out with fresh water and leaving the holding tank empty whenever possible. Check the thru-hulls, seacocks, connectors and hose clamps regularly. Make sure the seacocks turn freely. BENETEAU 331 Page 63 of 73 Jan. 10, 2003 rev 02...
Page 64 Water temperature, salinity, the presence of neighboring boats, the nature of the bottom and the materials in the dock will all affect the life of your boat's anodes. Order your spare anodes thru your dealer or from Beneteau Customer Service. CALIFORNIA...
Page 65 (preferably on a lawn) to dry. Never dry a sail by hoisting it and letting it flog in the wind; this will very quickly cause the sail to deteriorate. Never fold and store a damp sail. BENETEAU 331 Page 65 of 73 Jan. 10, 2003...
Page 66: Xxiii) Winterizing Procedures
The following sections are oriented towards hauling your boat for winter storage in a cold climate, but they are also a good guideline as a lay-up procedure for your Beneteau in any climate.
Page 67 If possible, allow this to sit in the tank overnight, then completely pump out and drain the entire system. If antifreeze is used in the system, check in the manufacturer's literature for the recommended type. BENETEAU 331 Page 67 of 73 Jan. 10, 2003...
Page 68 Completely pump out bilge of any water and clean out any debris present. Bilge pumps should be pumped dry and hoses disconnected, to ensure that no water is left in the system. BENETEAU 331 Page 68 of 73 Jan. 10, 2003...
Page 69 SHRINK-WRAP THE BOAT BY TAPING TO THE HULL. ALWAYS ASSURE GOOD VENTILATION. SAILS Remove the sails, clean following the sail makers recommendations and store in a clean dry space. BENETEAU 331 Page 69 of 73 Jan. 10, 2003 rev 02...
Page 70: Xxiv) Supplier Information List
XXIV) SUPPLIER INFORMATION LIST The following page lists our key suppliers in the United States. If you need information from a supplier not listed you may contact Beneteau’s Customer Service Department in Marion, South Carolina at 1-843- 423-4201. BENETEAU 331 Page 70 of 73 Jan.
Page 71 (813) 446-8800 www.maxone@aol.com Westerbeke Westerbeke Engines Avon Industrial Park Avon 02322 (508) 588-7700 (508) 559-9323 www.westerbeke.com Yanmar Yanmar Engine 2365 Route 22 Union 07083- (908) 964-0700 (908) 964-5032 engcity@eclipe.net BENETEAU 331 Page 71 of 73 Jan. 10, 2003 rev 02...
Page 72: Xxv) Environment
Do not throw plastic bags overboard. You love the sea, just as we do; therefore, help us to protect it and do not pollute it. BENETEAU 331 Page 72 of 73 Jan. 10, 2003...
Page 73: Xxvi) Centerboard System
(providing that it is sitting on a firm & stable bottom). Or when hauled out, the boat can be stored in this manner with a minimum of added support. BENETEAU 331 Page 73 of 73 Jan. 10, 2003...

BENETEAU 331 Owner's Manual

Quick Links

HULL IDENTIFICATION NUMBER:

Need help?

Questions and answers

Related Manuals for BENETEAU 331

Summary of Contents for BENETEAU 331

Table of Contents