Replacing The Blades - Husqvarna Automower Operator's Manual

Chassis
Clean both the top and underside of the chassis.
Remove grass that has collected between the chassis
and body. Brush or wipe with a damp cloth.
IMPORTANT INFORMATION
Do not use running water when cleaning.
Wheels
Clean around the front and rear wheels and around the
front wheel suspension.
Body
Use a damp, soft sponge or cloth to clean the body.
If the body is very dirty it may be necessary to use
a soap solution or washing-up liquid.

8.6 Replacing the blades

WARNING
Always use original blades and
screws when replacing.
Only replacing the blades and
reusing the screw can result in the
screw wearing during mowing and
shearing off. The blades can then be
thrown out and cause serious injury.
There are three blades on the Automower, which are
screwed into the blade disc. The blades have two
edges to ensure a longer service life. The blade disc
rotates alternately to the left and alternately to the
right.
All three blades and screws must be replaced at the
same time to obtain a balanced mowing system.
8. Maintenance
3012-699
3012-422
Automower from
™
73