Husqvarna Automower Operator's Manual page 14

2. Presentation
The STOP button on the top of Automower is mainly
used to stop the mower when it's running. When the
STOP button is pressed a cover opens, behind which
there is a control panel. The STOP button remains
depressed until the cover is closed again. This acts
as start inhibitor.
3012-388
The control panel on the top of the Automower is
where you manage all the mower settings. The main
switch is also located on the control panel. Open the
control panel cover by pressing down the STOP
button.
When the main switch is turned ON for the first time, a
start-up sequence begins which includes: selection of
the language, time format, date format and four digit
PIN code, plus setting of the time and date, see
page 34.
3012-700
The selected PIN code must then be entered each
time the main switch is moved to the ON position. This
theft-prevention function is called Time lock (4-1-2) and
Automower has this function activated as a default
setting. The function also means that the mower stops
mowing after a set number of days and will not
continue until the correct PIN code has been entered.
The function can be deactivated or changed as
required. For more information about Time lock (4-1-2),
see page 60.
The Automower can enter a sleep mode to save
power. The display on the control panel is then
completely dimmed.
The sleep mode is activated 25 minutes after the
STOP button has been pressed and then not reset to
the operating mode. Automower is then activated by
switching the main switch off and on.
The sleep mode can also be activated in the event of
a fault occurring during mowing or charging and
which is not rectified within 25 minutes. The
3012-400
Automower is then activated by pressing the STOP
button.
14 Automower from
™