Husqvarna Automower Operator's Manual page 32

3. Installation
2. Slide in the ends of the boundary wire in the
lowermost holes on the charging station and
catch them in the uppermost holes.
The right hand wire end should be inserted in the
right hand hole, and the left hand wire end in the
left hand hole.
IMPORTANT INFORMATION
The boundary wire must not be crossed when
connecting to the charging station. Therefore
the right hand wire end must be connected to
the right hand connector on the charging
station and vice versa.
3. Place the cable ends in the connector:
• Open the connector.
• Place the wire in the connector grip.
4. Press the connector together using a pair of
pliers. Press until you hear a click.
32 Automower from
™
3012-508
3012-506
3012-284
3012-264