Fault Symptom - Husqvarna AUTOMOWER 210 C Operator's Manual

8.2 Fault symptom

If your Automower does not work correctly, follow the trouble shooting guide below. If the fault persists;
contact your dealer.
Symptom
Uneven mowing
results
Automower vibrates
The mower mows for
shorter periods than
usual
8. TROUBLE SHOOTING
Cause
Automower works too few hours per
week.
Working area too large.
Dull blades.
Long grass in relation to the set
cutting height.
Accumulation of grass by the blade
disc or around the motor shaft.
Unbalanced blade disc or damaged
blades.
Grass or a foreign object is blocking
the blade disc or skid plate.
This behavior is normal in high
temperatures (gradually increasing
above 25 °C).
The battery is spent.
Action
Increase the mowing time.
Try limiting the working area or
extending the mowing time.
Replace all the blades and screws so
that the rotating parts are balanced.
Increase the cutting height and then
successively lower.
Check that the skid plate and blade
disc rotate easily. If not, the skid plate
and perhaps the blade disc must be
removed and the grass and foreign
objects removed. See 7.4 Cleaning
on page 39.
Inspect the blades and screws and
replace them if necessary.
Dismantle and clean the skid plate
and blade disc.
No action.
Contact your dealer to check and
replace the battery.
English - 45