Fault Symptom - Husqvarna 230 ACX/220 AC Operator's Manual

9.2 Fault symptom

If your Automower does not work correctly, follow the
trouble shooting guide below. If the fault persists;
contact your dealer.
Symptom
Uneven mowing
results
Automower runs at
the wrong time
Automower vibrates
Automower runs, but
the blade disc does
not rotate
The mower mows for
shorter periods than
usual between
charges
Both the mowing and
charging times are
shorter than usual
76 - English
9. TROUBLE SHOOTING
Cause
Automower works too few hours per
day.
Working area too large.
Dull blades.
Long grass in relation to the set
cutting height.
The mower seems to work more at
the top of a slope than at the bottom.
Accumulation of grass by the blade
disc or around the motor shaft.
The clock Automower on needs to be
set.
The start and stop times for mowing
are incorrect.
Unbalanced blade disc or damaged
blades.
Automower is looking for the charging
station.
Grass or a foreign object is blocking
the blade disc or skid plate.
This behavior is normal in high
temperatures (gradually increasing
above 25 °C).
Action
Increase the mowing time, see 6.4
Timer (2) on page 48.
Try limiting the working area or
extending the working time, see 6.4
Timer (2) on page 48.
Replace all the blades and screws so
that the rotating parts are balanced.
Increase the cutting height and then
successively lower.
Change the Garden shape (3-3)
setting to Open.
Check that the skid plate and blade
disc rotate easily. If not, the skid plate
and perhaps the blade disc must be
removed and the grass and foreign
objects removed. See 8.5 Cleaning
on page 71.
Set the clock, see Time and date
(4-4) on page 63.
Adjust the start and stop time settings
for mowing, see 6.4 Timer (2) on
page 48.
Inspect the blades and screws and
replace them if necessary.
No action. The blade disc does not
rotate when the mower is searching
for the charging station.
Dismantle and clean the skid plate
and blade disc.
No action.