Main Switch; Indicator Lamps - Husqvarna AUTOMOWER 210 C Operator's Manual

5.3 Main switch

4. Set the main switch in the ON position to start
Automower.
Set the main switch in the OFF position when
you are not using the mower or if you want to
work on the blade disc.
When the main switch is set in the OFF position
the motors on the mower cannot start.

5.4 Indicator lamps

The indicator lamps indicate the status of the mower. If
all the lamps are out, the mower is in sleep mode. Start
the mower again by switching the main switch off and
on.
5. PIN code:
• The lamp is lit with a steady light: The PIN code
has been entered and the mower is ready to
start. Star the mower by closing the cover.
• The lamp flashes: The PIN code has not been
entered. Enter the PIN code using the
numerical buttons followed by the YES button.
6. Battery:
• The lamp is out: The mower is not charging
and it is sufficiently charged to mow.
• The lamp is lit with a steady light: Mower
charging.
• The lamp flashes: The mower needs to charge.
7. Fault:
• The lamp is out: No fault.
• The lamp flashes or is lit with a steady light: A
fault means the mower can not start, see 8. Fault
messages on page 42.
34 - English
5. CONTROL PANEL
5
6
7
4
3012-746
3012-780