Reset Button - HP MSR20-1X Series Installation Manual

LED
WLAN
ACT
B1
B2
LINK/ACT

Reset button

The MSR20- 1 X has a Reset button to restart the system and restore the factory defaults.
If you press the button shortly, the router is restarted.
•
If you press the button for at least five seconds, the router is restarted and restores to the factory
•
defaults.
Location Status
Slow flashing
(green)
Front panel Fast flashing
(green)
Off
Solid green
Front panel
Off
Solid green
Front panel
Off
Solid green
Front panel
Off
Solid green
Rear panel Flashing green
Off
Description
The system is operating properly.
The device is working under a large amount of traffic.
The system is operating abnormally.
A BRI link is present.
No BRI link is present.
Data is being transmitted or received in the B1
channel.
No data is being transmitted or received in the B1
channel.
Data is being transmitted or received in the B2
channel.
No data is being transmitted or received in the B2
channel.
A G.SHDSL.BIS link is present.
Data is being transmitted or received.
No carrier signal is received.
48