Grounding The Router - HP MSR20-1X Series Installation Manual

To install the router to a 19-inch rack:
Determine where to install the cage nuts according to the hole distances of the mounting brackets.
1.
Install cage nuts to the rack posts.
2.
Attach the front left and right mounting brackets to the router.
3.
Fix the router horizontally by fastening the mounting brackets to the rack with appropriate pan
4.
head screws. The specifications of pan head screws must satisfy the installation requirements, and
rustproof treatment has been made to their surfaces.
Figure 23 MSR20-1X mounting brackets
(1) Left front mounting bracket
Figure 24 Fix the router to the rack
1
3
WARNING!
Mounting brackets support only the weight of the router. To avoid damage to the router, do not place any
objects on the router.

Grounding the router

WARNING!
Correctly connecting the router grounding cable is crucial to lightning protection and EMI protection.
•
The grounding resistance should be less than 5 ohms. If the router is installed in a 19-inch standard rack,
•
the rack must also be well grounded.
(2) Right front mounting bracket
2
4
18