Table of Contents
Advertisement
PCB Version
BootWare Validating...
Press Ctrl+B to enter extended boot menu...
Starting to get the main application file--flash0:/mainmsr201x.bin!.............
............................................................................
............................................................................
....
The main application file is self-decompressing.............................
.......
Done!
System application is starting...
User interface con0 is available.
Press ENTER to get started.
Press Enter and the system displays the following prompt:
<HP>
This prompt indicates that the router has entered user view and is ready to configure.
Power-on check
After powering on the router, check the following items:
The LEDs on the front panel are normal.
1.
The following table describes normal LED status after the router is powered on.
Table 5 Normal LED status after the router is powered on
LED
PWR
SYS
The configuration terminal displays information correctly. You can see the startup window on the
2.
local configuration terminal. For more information, see
After the power-on self-test (POST), the system prompts you to press Enter. When the command line
3.
prompt appears, the router is ready to configure.
Configuring basic settings for the router
After the router is powered on for the first time, configure basic settings for the router. For more
information, see HP MSR Router Series Fundamentals Configuration Guide and HP MSR Router Series
Fundamentals Command Reference.
: 3.0
Status
Steady green
Flashing green slowly
31
Meaning
The power supply is working
properly.
The system is working properly.
"Startup
process."
Hide quick links:
Advertisement
Table of Contents
