Scenario 2; Scenario 3; Reset Button Usage Guidelines - HP MSR93X Installation Manual

Solution
Because the router is replaced, you do not need to save the configuration of the router. In this case,
you can press the Reset button for more than 4 seconds to reboot the router and restore the factory
settings. Then, you can use the username and password shipped with the router to log in to the router.
When the router configuration must be saved and you have a console cable, you can log in to the
router from the BootWare menu. For more information, see

Scenario 2

Symptom
After the configuration is modified, the network connectivity is lost. When you check the configuration,
the configuration is very complicated and it is hard to locate the errors. In this case, you must
configure the router again.
Solution
If you have not saved any configuration, you can reboot the router through pressing the Reset button
for a short time or power off the router.
If you have saved the configuration, delete the configuration file at the CLI, and press the Reset button
to restore the factory settings.

Scenario 3

Symptom
The router crashes.
Solution
Press the Reset button for a short time to reboot the router.

Reset button usage guidelines

The router provides the Reset button. You can use the button to reboot the system or restore the factory
settings.
1. Press the Reset button for a short time to reboot the router.
2. Press the Reset button for more than 4 seconds to reboot the router and restore the factory
settings.
"User password
30
loss."